Hey guys, I was wondering if you have any experience with this head unit
I just picked it up and want to put it in today but I read a review stating that it will not playback video while moving.

I have googled and came back with hits but there is no solid consensus....

Do I Ground out the Green wire thats supposed to go to the Parking brake?

Do I have to put a switch in to only show the deck ground on that wire after the deck initalizes?

I have also heard there is a way to trick it with a loop through the remote and backup camera wiring????

I'm lost all of it seems to be different and most posts on this are for the AVIN_C models and some have stated the procedures are different for the AVic-1,2,3, avh 5700 - 6900 blah blah....

Have any of you here cracked this playback while driving issue on this model\\\pioneer AVH-P5700DVD ???

Thanks in advance.....

ground the green wire that goes to parking brake. That should do it IIRC

ground the green wire that goes to parking brake. That should do it IIRC


So you have wired up this deck before eagle? I thought I had read that the p5700dvd is too new to do it this way because it checks to see if the parking brake wire is Pre-grounded before it initalizes?

no i haven't done this one (misread it as 7500, sorry), but other than the avic n2 & n3 all pioneers have been that way. The later avics used the speed sensor as a secondary interrupt.

Best bet is try it, and see what happens. Worst case you can do a toggle switch or a time delay circuit that would close it to ground after an appropriate time.

Just attach the green wire to your ground. You will be fine. I have a 7000.

Same thing...

Thanks guys, I'll try it out tommorow.

JUST GROUNDING WONT WORK! if its the newer model it has to see ground open ground. simply ground the green wire out and have a toggle inbetween it, or wire up a relay!

I toggled it, works like a charm....It didnt work just grounding...
Thanks for the tips guys....

Very nice! How do you like it?

Very nice! How do you like it?

I love it so far, the audio from dvd is soooo clean and clear...
I also like the fact it plays my vcd movies off the torrents..

I'll post up some pics soon...

I toggled it, works like a charm....It didnt work just grounding...
Thanks for the tips guys....

thansk you for confirming that it does need toggling. damn pioneer, they are getting too damn smart.

Sorry to bring this thread from the dead but I would like to know how the relay was wired up. I'll be buying this head unit in a couple of days.

No relay. a toggle.

you can make a relay. i forget off the top of my head the pins

So just put a toggle switch between the ground and that's it?