SOLD

OK,
let me start off by saying the car is currently not running.

That said this car has more money and time invested in it than i can recall. The reason im selling it is that i am tired of working on the car i need to focus more on school and get myself out of debt, and im going to go with something alot more stock. the car alone has thousands upon thousands invested. This is one of a handful of twin turboed bmws in the world let alone an e36.

Here we go,

Engine
M50b25 2.5L Motor Bored to 2.6L (Proffesionally done by Mulders Machine shop) New Bearrings all around
M3 Camshafts
3 Angle Ported Head
Twin Mitsu 14B
Twin T 28 Wastegates
28"x9"x3" Bar and Plate FMIC
2.5" Intercooler Pipes
Custom Wastegate Dumps
Custom Custom Turbo Headers
Custom Twin 2.25" Downpipes
Custom 3" Exhaust
Custom 3" Track Pipe
Greddy Type S BOV
ATP 3" Flex Bellow
Magnaflow 3" High Flow Cat
Magnaflow Muffler
AEM EMS #1050 (Modded by member kcevo)
AEM Harness Jumper
AEM Twin Fire Ignition
GM 3.5 bar Map
Innovate Wideband Controller
Siemens 650cc Injectors
ARP Headstuds
VAC Cometic .08 MLS Head Gasket
WiseCo Pistons 8.9 to 1 compression
WiseCo Piston Rings
Twin K&N Filters Off Turbos
S54 Radiatior
Crank Fan Delete
Flexlite Radiator Fan
NGK Cold Spark Plugs

Drivetrain Mods:
3.15 LSD
Centerforce Stage IV, 6 Puck Disk
M3 Slave Cylinder
Turner motorsport LTW flywheel
ZF Transmission
M3 Drive Shaft
M3 Guibo

Suspension
Tein SSp coilovers (More if you want them)
Tein Camber plates "" ""
UUC rear sway bar
TMS Rear subfame reinforcement kit

Exterior
M Technic Cut Front Bumper
M Technic Rear Valence
M Technic Side Skirts
M3 Mirrors
M3 Spoiler
Smoked Tail Lights
Depot Euro Headlights W/ Angel Eyes
Clear Turn Signals
Tinted Windows

wheels are mb motoring Revs 17x7 w 235/45 kuhmo mxs
New balo rotors
HPS pads
SS brake lines

I know im forgeting a lot of stuff, if there is some intrest in the car ill compile a detailed mod list, this waas off the top of my head.
Im just seeing if anyone want to take over what little is left with my poject, Almost all of the stuff up there is brand new, pm me if your intrsted. The twins were running for a short period then i blew the stock headgasket and went all out with the pistons,
Im asking $8500 or whatever sounds good, I can also remove or keep parts to lower the price a lot. car has clean title which i have.
now for the pics
http://i22.photobucket.com/albums/b334/redforcedbmw/david017.jpg
http://i22.photobucket.com/albums/b334/redforcedbmw/twinsdone006.jpg
http://i22.photobucket.com/albums/b334/redforcedbmw/a007.jpg
http://i22.photobucket.com/albums/b334/redforcedbmw/a008.jpg
http://i22.photobucket.com/albums/b334/redforcedbmw/twinsdone004.jpg
http://memimage.cardomain.net/member_images/8/web/704000-704999/704591_1_full.jpg
and sorry some of the pics are low quality took em with videocamera

what would it take to get it running..also how much and wil it blow again too much power/how much power?

what would it take to get it running..also how much and wil it blow again too much power/how much power?

its all based on time, all the parts are there. bunch of wiring, little to nofabbing or engine work. as for power this car has the potential to go big, i was building it shooting for 500whp

what rims are on the front in this pic?

http://i22.photobucket.com/albums/b334/redforcedbmw/a007.jpg

like holy crap that thing is nutz!! so the head gasket/piston issue is fixed now but just needs to be setup and tuned/ wired and stuff...?? wonder how mucha bimmer shop would charge for this.... hmmm im local sorta........ ill stay tuned

like holy crap that thing is nutz!! so the head gasket/piston issue is fixed now but just needs to be setup and tuned/ wired and stuff...?? wonder how mucha bimmer shop would charge for this.... hmmm im local sorta........ ill stay tuned

yeah the head gasket and pistons are in there, let me know what you think

and the rims in the front are the mb motoring ones.

ttt

wow!! Have you sold it yet?

any underside pics?

No dyno sheet ?

im guessing this thing is gone? i would sure as hell like to see that thing in action

I've got it, and after alot of work it may be running by tomorrow morning/ready for its first crank on rebuild, etc. I'll get some pictures/videos/numbers up once its up and running on full boost; it should be fun to watch (and drive);

-Hunter

seems pretty cheap and a nice project if someone can get this thing up and running.

I've got it, and after alot of work it may be running by tomorrow morning/ready for its first crank on rebuild, etc. I'll get some pictures/videos/numbers up once its up and running on full boost; it should be fun to watch (and drive);

-Hunter


insane-o.

looking forward to seeing it move forward.

let me just say that the second to last picture was my desktop background for most of last year....good luck!

i wanna know how the project is going m52e30 got it running yet any photos and or vid's? want to keep it or sell it?

updates?