SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD SOLD
Wheel studs are sold
Paypal - Steven.race@smithnephew.com

Bimmerworld 90mm 'bulletnose' studs w/ 19mm nuts
- 22 included of each (two extra)
- used for ~3k miles
- no rust or other issues
- New cost was $175


- (4) 17x7.5 CCW Classics in E36 fitment
- No tires
- 9.5/10 appearance wise
- 'shotpeened' finish which is a bit rougher than the normal finish.
- This is the 'race' version. Slightly lighter, no centercaps, and different bolts.
- Retail cost ~$1850
- Can be rebuilt for new widths or center sections for $60-150 per wheel by CCW.

High res pics here:
http://www.racefactoryfab.com/forsale/ccwbig1.jpg
http://www.racefactoryfab.com/forsale/ccwbig2.jpg
http://www.racefactoryfab.com/forsale/ccwbig3.jpg
http://www.racefactoryfab.com/forsale/ccwbig4.jpg

http://www.racefactoryfab.com/forsale/ccw5.jpg
http://www.racefactoryfab.com/forsale/ccw6.jpg
http://www.racefactoryfab.com/forsale/ccw1.jpg
http://www.racefactoryfab.com/forsale/ccw2.jpg
http://www.racefactoryfab.com/forsale/ccw3.jpg
http://www.racefactoryfab.com/forsale/ccw4.jpg

You think I might have clearance problems with 19mm nuts on BBS wheels? The 90mm should be good up to like a 18mm spacer also right? From the looks of it the nuts are silver. I may be interested in the studs.

You think I might have clearance problems with 19mm nuts on BBS wheels? The 90mm should be good up to like a 18mm spacer also right? From the looks of it the nuts are silver. I may be interested in the studs.

BBS wheels shouldn't be a problem. I ran 18x8 BBS RCs and Rxs without any issues.

Not sure on the maximum size spacer..

I would kill for these wheels. If only I could sell mine for 1,000, I would be on these in a heart beat.

No anyone looking for MVR reps? lol

Good luck with the sale.

Sick wheels. Hows the brake clearance?

Sick wheels. Hows the brake clearance?

I use a 6mm (I believe) spacer up front to clear the stoptechs. They clear stock brakes just fine. I'll include whatever spacers with the wheels.

I use a 6mm (I believe) spacer up front to clear the stoptechs..

Damn...Im only running a 3mm to have my Fikses clear my Brembos, and am looking for another set of wheels that will clear my brakes with ease so that I can go back and forth whenever I choose.

Bump for a great deal on some quality wheels!

Damn...Im only running a 3mm to have my Fikses clear my Brembos, and am looking for another set of wheels that will clear my brakes with ease so that I can go back and forth whenever I choose.

Bump for a great deal on some quality wheels!

The only thing I've found that clears Stoptech's without spacers are the SSR Comps (in proper offset) and BBS RKs (but not rxs, rcs, etc). Stupid brakes :)

The only thing I've found that clears Stoptech's without spacers are the SSR Comps (in proper offset) and BBS RKs (but not rxs, rcs, etc). Stupid brakes :)
The Stoptechs are definitely one of the larger/bulkier calipers out there. However, I dont know that my brembos are much, if any smaller. :(

Do you have a weight on the wheels?

PS: Can you PM me a price on the GT35R car? Or if you have a thread, maybe post a link to it.

The Stoptechs are definitely one of the larger/bulkier calipers out there. However, I dont know that my brembos are much, if any smaller. :(

Do you have a weight on the wheels?

PS: Can you PM me a price on the GT35R car? Or if you have a thread, maybe post a link to it.

They are 17.5 lbs each.

I've been lazy and haven't made any official for sale ads yet. The gt35r'd car is last on the list, I'll likely just pull the turbo stuff off and sell as a kit. The Euro s50 m3 and cosmos/modena (no sunroof!) cars will go first.

I saw these wheels in person and they are really sharp. Bump for a good guy. Good luck with the sale.

I've been lazy and haven't made any official for sale ads yet. The gt35r'd car is last on the list, I'll likely just pull the turbo stuff off and sell as a kit. The Euro s50 m3 and cosmos/modena (no sunroof!) cars will go first.
Ill be on the lookout for the ads. You might consider selling the car with the turbo kit (and GT35R) on there, as there might be interested buyers in that very setup..(I.E. me :cool )