Parting out my parts car!

LKM - This worked fine, I resoldered it as a preventative measure a couple years ago. $45
http://img56.imageshack.us/img56/8703/img2687smalluu9.jpg

Parcel shelf - I thought this was sold, but he backed out. I had this covered in custom carpet, very similar to parchment in color. I loved it, it looks a LOT better in the car then the factory 'mouse fur' material and will hold up better. $35
http://img56.imageshack.us/img56/3379/img2697smallnr4.jpg

Here are some pics of the car so you can see what is left, let me know what else you're looking for!!

http://img56.imageshack.us/img56/853/img2689smalldh5.jpg
http://img56.imageshack.us/img56/6877/img2690smallxh6.jpg
http://img340.imageshack.us/img340/2425/img2691smallbs6.jpg
http://img56.imageshack.us/img56/4845/img2692smallvc4.jpg

OK - how much for blower fan shipped to 92107?

inside color and if it is tan i need a complete glove box with latch shiped to 85704

i think i see tan

I also need the front panel support: PN 51711934328

Tricken - Inside is "parchment" and I have to keep the glovebox, sorry.

///Metal - How about $25 plus whatever the actual shipping cost is?

///Metal - How about $25 plus whatever the actual shipping cost is?

Deal. Do you accept Paypal?

Yep, armenb1 *AT* juno.com

Give me a day or two to pull it, box it, and get a total, if that's ok.

That's fine. PM me the exact amount once you have it figured out and I'll Paypal you the money the same day.

How much shipped for the rear shelf to 30039? Or is it $35 shipped :) Do you still have the door panels also?

Thanks.

I need a passenger front door lock actuator and the windshield trim. Let me know, I already PM'd you about the trim.

armrest is it any good? i want both armrest and mount if they are tan and good

How much shipped for the rear shelf to 30039? Or is it $35 shipped :) Do you still have the door panels also?

Thanks.

damn...beat me to it. well i really need gray anyway.

how bout a sunroof motor cover?

nevermind. just looked at the pics more closely and i dont think i see a sunroof

the door panels are not available.

just FYI...

are you selling the front seats? If so, how much for one or both.

Damn, let me know on the rear shelf. Thanks :)

atl530i - Shelf is $35 plus shipping, I'll get a quote and let you know. DH is right, I'm keeping the door panels.

Smoove - I'll get all those pulled and get you a price. I'm thinking $25 for the trim and $15 for the actuator plus shipping....sound reasonable?

Fkong - armrests are ok, not fantastic condition, but ok. I'd rather sell the whole seat though.

Spartigus - I'd take $75 per seat, $150 for the pair plus shipping. I can get you pics of them, the driver's seat has some wear but no tears, heaters work on both seats though the passenger's seat works better.

Sunroof panel cover is gone.

Brackets for the CD Changer if it had one? I have the Alpine unit 82111468014.

If you get a chance can you post some pics of the seats. Thanks.

Ok, I guess it's my turn.:)
I need the lock assembly for the drivers door. Everything from handle to handle to lock pull. I was also interested in the heater core.:devillookIf the heater core is compatible with my 525 with an m20. But, I guess you would know.:buttrock

Oh yeah you know what else...the center and bottom moldings off the front fenders. yeah thats about it. Uhmmmm....ok ok. Maybe the sills with clips also. Yeah those too. But, thats it I promise. Maybe I shouldn't promise...but I am pretty sure.:confused

Mr. Project,
Over at e34.net I inquired about the glovebox flashlight, any key fobs, and non-cracked fog lights. let me know.... thx!

Pm's and pics will be sent/posted tonight, I got some of the stuff boxed up yesterday.

BMRSEB - I don't think I have a changer bracket. The car used to have one but I think it got tossed years ago.

Kirasam - I think I have some of what you're looking for, I want to take some pics and make sure we're talking about the same stuff.

NJHokie - I don't have anything from your list, sorry.

...BMRSEB - I don't think I have a changer bracket. The car used to have one but I think it got tossed years ago.

Thanks anyway..

PMs sent to interested parties, Kirasam, I'll have to get back to you on your stuff.

Seat pics:
Driver's bolster:
http://img357.imageshack.us/img357/3493/img2708mediumdj2.jpg
Driver's seat:
http://img208.imageshack.us/img208/4291/img2707mediumvm3.jpg
Passenger's seat:
http://img208.imageshack.us/img208/1387/img2705mediumbb1.jpg

Sunroof switch panel to 37772?

Both drivers side door gaskets available? Condition?

Quote me on shipping combined with the LKM :)

Edit- I also need the connector off the front harness that connects to the fog light, just snipped off with a few inches for solder/shrink tube. Lost a fog light last weekend in a flood, long story, but it took the connector with it wherever it went :(

Thanks-

Aaron

Sunroof switch panel is gone.

Abakos, pm me your zip code and I'll total it up for you. I'll throw in the fog light wiring for $3 if you buy the LKM. :) Rear door gaskets were in decent shape but are gone, driver's door gasket is in poor shape, passenger's side front door is ok if you want that one.

no problem no rush

My car doesn't have the memory or the heated seats? Do you think that will be a problem. Are you going to include the motors too?

Yes, seats would include all motors...and all work. I think most E34s were pre-wired for heat..not sure about memory, though these don't have memory anyway.

I also have a few parts for a '92 M50 E34...anybody want an extra MAF or stock airbox for a non-VANOS car?

Hey Armen,
Let me know what you have left when you get done parting it out. If you have the rear doors, rocker panels, and a few other things I'd be seriously interested in taking it all off your hands. Probably for a little less than what we talked about though, as stuff will be gone and I'm not sure if I can swing that at the moment anyway.

Thanks,
Ryan

do u have the side right side cover in the trunk? if you do, is it the one with a receptacle?

What would you want, shipped to 44074, for:
- The center trunk interior panel (goes on the back of the rear seats), if it's at least in one piece.
- Front left fender molding strip, if it's not warped or too rusted.
- As many of the door bottom trim pieces as you have.
- The strip of plastic trim that goes in the driver's doorsill.

Hey Armen,
Let me know what you have left when you get done parting it out. If you have the rear doors, rocker panels, and a few other things I'd be seriously interested in taking it all off your hands. Probably for a little less than what we talked about though, as stuff will be gone and I'm not sure if I can swing that at the moment anyway.

Thanks,
Ryan

Thanks, Ryan, I will. I just wanted to give some people a chance to get the little bits they might need before either we work out a deal on the shell, or I haul it off for scrap.

I'm trying to find out when to expect that the Corvair project is coming back, because ideally I'd like to have the sedan shell out of the way when that comes back. Probably in the early October timeframe. We can talk more when you're back this way on the 23rd.

you have a couple weeks on that Armen... they are trying to get Bob's Sister's car out of there ASAP...

and they've got to get back to Indiana, AND you need to take it easy for a few weeks...

I'll take the driver's seat. Write back to see about arrangment of paying and shipping. Thanks.

Do you have the left rear window regulator?

do u have the side right side cover in the trunk? if you do, is it the one with a receptacle?

Not sure what you mean by receptacle...you mean the little plastic bin? Yes, I have that. If this pic looks right, I'll take $15 plus shipping
http://img158.imageshack.us/img158/4416/img2739smallll6.jpg

What would you want, shipped to 44074, for:
- The center trunk interior panel (goes on the back of the rear seats), if it's at least in one piece. - check the pic
- Front left fender molding strip, if it's not warped or too rusted. - gone
- As many of the door bottom trim pieces as you have. rusted
- The strip of plastic trim that goes in the driver's doorsill. - the black and silver, or the carpet-colored piece?
http://img158.imageshack.us/img158/7346/img2738smallkm6.jpg
If this looks right, I'll take $15 plus shipping...but shipping has been kinda steep on these lightweight bulky items.

Do you have the left rear window regulator?

Yep, $45 plus shipping

Yep, that's the piece. Eyeballing it, it's something like 30" x 20" x 1.5", which is $7.20 shipped via USPS. If it's much bigger than that, it'd be more like 15-20 for shipping.

I'm looking for the carpet-colored piece - one piece of plastic, should have several longitudinal ridges.

Yep, that's the piece. Eyeballing it, it's something like 30" x 20" x 1.5", which is $7.20 shipped via USPS. If it's much bigger than that, it'd be more like 15-20 for shipping.

I'm looking for the carpet-colored piece - one piece of plastic, should have several longitudinal ridges.

Yeah, I have that plastic piece. My interior is 'Parchment'...so far everybody else has has 'Natural Tan', which is a lighter color...do you want the Parchment piece?

Is there any way you could sell the drivers seat belt recepticle?

It could be neon pink with swastikas on it for all I care - I'm going to paint it black anyway.

Also remembered that my hood emblem is peeling badly - if you have either the rear or the front, I'd take it

(and does my estimate of that panel's size seem about right?)

Moroza, the box is 37"X22"X5". It's only about an inch wider than the panel, I had to buy a custom box and cut it down. I gotta charge a little for the box I bought...shipping total is then about $22 via fedex.

For $15 + 22 = $37, I'll throw in the sill trim panel for free. Heck of a deal. :) I didn't paint the sill trim panel pink, though. That I saved for you. :)

Is there any way you could sell the drivers seat belt recepticle?

I could sell the passenger's side one, which can be used on the driver's side. $15 shipped in a padded envelope.

:rofl

we should have a UPS depot at Armen's house... they have got to love us lately.

I will take the seat belt recepticle, can't beat that price!

Got the rear exterior windshied trim left? The 2 "L" shaped trim that surrounds the wondow and the center cap.

Yep, PM sent to you dynamicone.

E36 328is, thanks for the payment. I will try to ship tomorrow. (gotta get it removed tonight)

Bump, need to get rid of this car soon, so let me know if you're looking for something.

You know it's bad when I get tired of having a wrecked shell of a car sitting in my front yard. :)

Hi. DO you still have the front seats? I really only need the drivers side, but mine are not heated so I might as well take both.
My driver seat is twisted.. Have not found a lot on how to fix this, is it fixable, or do I just replace?

Thanks
Ash

Armen,

I sent you an e-mail last week about the rear shelf and other stuff. I didn't hear back from you with a final price for shipping. I'm still interested! Please let me know ASAP. Thanks.

Hi. DO you still have the front seats? I really only need the drivers side, but mine are not heated so I might as well take both.
My driver seat is twisted.. Have not found a lot on how to fix this, is it fixable, or do I just replace?

Thanks
Ash

the seats are gone, I believe, but fixing the twist is actually very common and "simple" (if not easy) fix... its well documented over at bimmer.info IIRC.

Dr. Bimmer, sorry I haven't gotten back to you. I got it all boxed up today and need to weigh it. I'll let you know tomorrow.

BTW - The shell is gone, FlyerRyan hauled it off today. So if I didn't already have something in the works with you, it's probably too late.

Hi. DO you still have the front seats? I really only need the drivers side, but mine are not heated so I might as well take both.
My driver seat is twisted.. Have not found a lot on how to fix this, is it fixable, or do I just replace?

Thanks
Ash

Sorry, I missed this one before. The seats are gone, but you can probably fix your twisted seat issue in less than an hour and for $0. Read this link:

http://bellsouthpwp.net/m/i/miales/seatcablesfix.htm

Price on front passenger fender shipped to 13676?

Noticed the front end was totaled, but couldn't tell if the rear deck lid ($35 but the guy backed out) was sold or not. If not, I would like to buy it from you.

Also,

-is the instument cluster avaiable and was it working? How much?
-Rear passeneger window motor
-roundels from the hood or trunk
-hub caps *plastic inserts*
-tools from the trunk set
-rear driver seat door panel
-front passenger door panel
-trunk shocks (the pistons that keep it open)

I think that's it ;-)

Thanks,

MKS
1991 525i 206000 miles and driving like a dream!

BTW - The shell is gone, FlyerRyan hauled it off today. So if I didn't already have something in the works with you, it's probably too late.

I need to highlight this statement


Price on front passenger fender shipped to 13676? Gone, see above.

Noticed the front end was totaled, but couldn't tell if the rear deck lid ($35 but the guy backed out) was sold or not. If not, I would like to buy it from you.

Also,

-is the instument cluster avaiable and was it working? How much? gone
-Rear passeneger window motor gone
-roundels from the hood or trunk no good ones
-hub caps *plastic inserts*keeping
-tools from the trunk set gone
-rear driver seat door panel keeping
-front passenger door panel keeping
-trunk shocks (the pistons that keep it open) gone

I think that's it ;-)

Thanks,

MKS
1991 525i 206000 miles and driving like a dream!

Decklid is sold pending payment from Dr. Bimmer.

I'd be happy to supply people parts, as long as I don't need them, now that I'm in possession of the car. However, the car is at home about 150 miles away from where I live (college), so what I'll need to do is get a bunch of requests, go home some weekend and pull it all and then send them out. So if you need something in a hurry, it probably isn't gonna happen. Feel free to PM or email me.

Armen, did you sell all the interior door panels? I can't remember if they're in the car or not.

Instrument cluster already went away, and I'm keeping the door panels for the Touring. Gonna do a black and tan combo next year sometime...probably similar to your car, Ryan, but with seats and door panels as well.

Instrument cluster already went away, and I'm keeping the door panels for the Touring. Gonna do a black and tan combo next year sometime...probably similar to your car, Ryan, but with seats and door panels as well.

That sounds sweet. When are you doing that, spring? If I'm around and you want help it'd be a fun weekend project.

Yeah, probably next summer...I'll keep you posted.

I'd like to see if you still have the front fenders available?If you could, email me at vinceinatorz@hotmail.com with yourresponse.
Thanks man.............Vinny