Hey everyone,

I have recently received the Bilstein PSS Coilovers and cannot wait to put them on my car. However, I have apparently one more thing to do in order to put them and it is to buy a camber kit/bolt.

I was wondering if you guys could give me a description of exactly what is the use of a camber kit/bolt and where I could find a decently priced kit/bolt and not have to spend $700+ for both rear and front camber kits.

If all else fails or cannot find a bolt, I'll just suck it up and buy the camber kits but I'd rather not spend that much money on cambers.

Thanks for the help anyone!

Shop around... especially if price is your concern...

With the Dinan gear, that should not matter though... :)

Unless you are going to really drop the car, you won't need extreme measures to have reasonable camber. You'll have more front camber than would be spec (probably around -1.5 for a reasonable drop), but that's really not a problem and will help tame understeer.

I have the bilstein pss coilovers and installed them without camber plates. So far with 5k miles on them everything seems to be A okay.
If you have the extra cash then I say do it , but it is not mandatory right away. Go with UUC if you decide to purchase.