|
View Full Version : Really need your help guys... littlelee1 08-24-2006, 06:24 PM Take a look at this thread and give me some info/pointers at what I should do. I have no way of getting to school now and it starts in 4 days. :( http://forums.bimmerforums.com/forum/showthread.php?p=7290605#post7290605 n3wbie 08-24-2006, 06:55 PM Take a look at this thread and give me some info/pointers at what I should do. I have no way of getting to school now and it starts in 4 days. :( http://forums.bimmerforums.com/forum/showthread.php?p=7290605#post7290605 When BMW built their cars i really doubt they had the idea to be running higher spring rates... but thats just my idea, there is no way BMW would consider covering any of that, nor would g/c even bother. This is just a case where some stuff just needs to be reinforced and its a DIY project :( littlelee1 08-24-2006, 07:03 PM When BMW built their cars i really doubt they had the idea to be running higher spring rates... but thats just my idea, there is no way BMW would consider covering any of that, nor would g/c even bother. This is just a case where some stuff just needs to be reinforced and its a DIY project :( Blah. Thats what I figured. Thanks n3wbie 08-24-2006, 08:26 PM Blah. Thats what I figured. Thanks well if you have some tools it should not be that hard to tackle SG_M3 08-24-2006, 09:16 PM When BMW built their cars i really doubt they had the idea to be running higher spring rates... but thats just my idea, there is no way BMW would consider covering any of that, nor would g/c even bother. This is just a case where some stuff just needs to be reinforced and its a DIY project :( my arms are ok with 1,000 lb springs. They worked just fine on the street with 525, 600, and 700 lb springs back there. The problem is coil bind. The spring was probably coil binding and that means infinate spring rate, something has to give. The aluminum arm did. PM'd you lee. littlelee1 08-24-2006, 10:25 PM my arms are ok with 1,000 lb springs. They worked just fine on the street with 525, 600, and 700 lb springs back there. The problem is coil bind. The spring was probably coil binding and that means infinate spring rate, something has to give. The aluminum arm did. PM'd you lee. Sent back :) MCM97 08-24-2006, 10:48 PM do you need a ride down there? Be glad to give you one Saturday if you don't mind slummin in a E36 M3 hinzm3 08-24-2006, 11:02 PM Damn Mark, I think about the most I would offer is to drop his ass off at the bust station!!!! :D MCM97 08-24-2006, 11:04 PM Damn Mark, I think about the most I would offer is to drop his ass off at the bust station!!!! :D freshmen girls ftw! Seriously, if you need a ride - oops, meant to post Sunday - I'll drive you down there Sunday. Also, I'm headed there for a career fair on Sept 19th if you need anything littlelee1 08-25-2006, 12:36 AM freshmen girls ftw! Seriously, if you need a ride - oops, meant to post Sunday - I'll drive you down there Sunday. Also, I'm headed there for a career fair on Sept 19th if you need anything I appreciate it, however I'm al;ready down here :D MCM97 08-25-2006, 08:32 AM I appreciate it, however I'm al;ready down here :D oh damn, this happened in cs? ouch... |