I am looking into a couple different sets of 15's. One of the sets is staggered 15x6 with ET33 in the front, and 15x7 with ET22 in the back. Could this work with jrcooks 3mm and 8mm spacers? 8mm in the front and 3mm in the back?I'm really not sure, it seems like it would be pretty close to fitting though...

Also if you could give me some info on what you are running for a 15" setup so i can see what works..

if you could tell me offsets, wheel width, spacer thickness (if you're using them), bolt length, tire size, and if you have any clearance issues.. Basically anything you can think of to give me an idea of what I can and cannot run for a setup. Thanks boies!

BBS Marhle 15 x 6.5 front, 15 x 7 rears..offset of these rims are 13mm.

My 323i has Racing Dynamics Springs, Bistein sports, BMP stress bars,
Dinan adjustable rear subframe.
http://i21.photobucket.com/albums/b297/jjgbmw323/DSC00340.jpg
http://i21.photobucket.com/albums/b297/jjgbmw323/DSC00445.jpg
http://e21.tricord.be/members/bmwe21/profilerim.JPG
http://i21.photobucket.com/albums/b297/jjgbmw323/DSC00627.jpg
*new pictures comming after she is finally finished this summer*

2nd set of Gold BBS RA rims with polished outer lips and gold centers,
found by BBS of North America on a showroom display.
15 x7 offset 25mm.
http://e21.tricord.be/members/bmwe21/DSC00402.JPG
I have rolled my fender lips all around and are running 195 50 15 P7s. I am going with 205 50 15s soon, and maybe 215 50 15s in the rears.

man... those are f#cking beautiful!

wanna sell your Marhle's???

man... those are f#cking beautiful!

wanna sell your Marhle's???

Thanks, but my marhles are the rare stagered ones, I am going to get them restored this year with a polished lip and silver centers.

what's your opinion on the setup i stated in the first post.. think it will fit?

I would think you would need bigger spacers.

Ive got 7's on mine with a higher offset and they fit on the back, so you probably wont even need spacers on the rear of yours. The front, however, could be an issue, backspace is going to be the determining factor, but you are right, you will probably need to space them out a couple mm.

I would think you would need bigger spacers.

thats what im thinking unfortunately.. for the front anyways.. at least 10 mm maybe 15mm spacers?

Ive got 7's on mine with a higher offset and they fit on the back, so you probably wont even need spacers on the rear of yours. The front, however, could be an issue, backspace is going to be the determining factor, but you are right, you will probably need to space them out a couple mm.
Today 12:15 AM

what are you using in the front for spacers?

im not yet, i havent had to turn it sharp enough to hit the tie rod :D

Im tossing up whether to use 20mm bolt on spacers, or just the 8-10mm spacers i need and use 8mm longer wheel bolts.