All,
I am considering a complete suspension upgrade with the TC Kline parts.
new RSM's, Trail Arm Bushings (staying with Delrin to remain prepared legal) Lower Control Arms, Camber Plates, Height Adjusters and 650/700lb Springs...

Was hoping for a member with a similar setup that could shed some real life track experience -- satisfied or not.

Thanks!

BTW, you already own rear height adjusters that you use with your Koni's

My friend owns a shop and has not seen good results with the Delrin trailing arm bushing. He said that in less than a year, the delrin was cracked. The delrin bushing also causes a lot of binding in your rear suspension.

Which TC Kline setup are you getting, the single or double adjustable?

i went w/ an OEM RTAB bushing w/ delrin shims and it was a quite noticable improvement over the old bushing alone. should be a silent and long lasting solution

I have D/A TC Kline coilovers, rear camber arms, camber plates on a E36 M3 and I love it. Easy to set up and car handles great. You can always get someone on the phone at TC Kline if you have any questions which is a plus.

i have a TC kline S/A setup for street/track. pete is the greatest guy to talk to. you will easily spend 30 minutes on the phone speaking suspension. i have 450F 600R