I Dont Know What To Do, I Took Off The Lug Bolts Tryed To Pop The Rim Off It Wouldnt Budge, Tryed Putttin Some Pressure On The Rim By Lowerin The Jack A Little, Still Nothing , Can Anyone Give Me Some Ideas ?,is There Something Im Forgeting That Only Bmw Has That I Need To Remove?, Or Is It Just Seised (if That How It Spelled?)???

You just need to beat on them a little. There is a protuding lip that centers the wheel on the hub, it gets corroded. I have used a long barthat I wedged between suspension parts, and the tire to loosen them (be carfull).

you can also loosen each lug bolt maybe 2 turns and then back up or down just enough to get rolling and hit the brakes.do not go driving this way,it is only meant for a few feet.otherwise,a big dead-blow hammer,the soft weighted type.has worked for me before.remember to loosen the lugs only slightly.

It's siezed! Use a rubber mallet/hammer to loosen the wheels. When you re-install the wheels, put some anti-siezing compound on it.

This happened to me too!

Had the same problem with an old Mercedes while I was living in Germany. They will eventually come off just be carefull. Follow the above advice.

thanks i appreaciate all the ideas ima try them all till one works, thanks again