Kevlar
06-20-2006, 03:16 PM
I'm curious if my wheels/tires, brakes and suspension would bolt up to a Z4M Coupe? The suspension probably wouldn't work... but the wheels/tires and brakes should. Now that would be sweet... :redspot
|
View Full Version : Z4M Coupe - Just me being curious... Kevlar 06-20-2006, 03:16 PM I'm curious if my wheels/tires, brakes and suspension would bolt up to a Z4M Coupe? The suspension probably wouldn't work... but the wheels/tires and brakes should. Now that would be sweet... :redspot BJO 06-20-2006, 05:29 PM from what i have read, the wheels offset will be similar to the e46 m3. my question is if 18x10's all around with 285/35/18 v710s' would work :D Kevlar 06-21-2006, 10:03 AM http://undergrad.nova.edu/kevin/z4coupe9pi.jpg Hmmm... possibilities. BimmerDawg 06-21-2006, 11:13 AM Yep, same wheel/tire combo, except you can fit 11s on the back of the M Coupe...:devillook Kevlar 06-21-2006, 11:37 AM 11s ... :eek3: 295/30/19 or 315/25/19 I would need to run 275/30/19 up front to compensate. Good bye fender liners. BJO 06-21-2006, 11:40 AM Yep, same wheel/tire combo, except you can fit 11s on the back of the M Coupe...:devillook would 17s clear the brakes? I could run 17x10 front 17x11 rear! thats 'vette specs! The HACK 06-21-2006, 05:12 PM from what i have read, the wheels offset will be similar to the e46 m3. my question is if 18x10's all around with 285/35/18 v710s' would work :D According to Ron Stygar who already received his Z4 M Coupe the offsets are: 8" front ET 42, 9" rear ET 30. I think the rears are 10mm off. |