I thought I'd take another shot at organizing this Saturday evening at the Checker Auto parking lot on Univeristy Ave just east of Snelling (Midway).

Looking to see if any are interested an in meeting early to get good spots (8:00 - 8:30). For those of you who haven't been there, it's down-right crazy with all the cars cruising and it's great to not only represent, but great to hang and watch cars. Checkers often has Euro cars in the lot.

I'm in. List?

GJGM3
<!-- / message --><!-- sig -->

Im down

You have your E36 up and ready to go 325iklu? How did that mass air work out for you? :)

I'm about 80% sure I'll be there. :buttrock

If i get my M50 manifold put in saturday I'll be down.

Need any help getting it done?

If i get my M50 manifold put in saturday I'll be down.


Have fun with that, and Eric R, turns out i needed a 6 pin maf not the 4pin I bought from you. The new one should be here tonight

Yeah if u wanna help me install it. that would prolly be easier...

oh no! Do you want it refunded? We should have checked into that bro.

96alpline328i, we can collaborate our minds. You have a Bentley service manual?

Got a couple things going on but I'll try and swing by there if I can.

tou, call me late-afternoon to catch up on where to meet us if you go. :thumbup: I am counting on that ride, remember? ;)

tou, call me late-afternoon to catch up on where to meet us if you go. :thumbup: I am counting on that ride, remember? ;)

Eric, PM me your cell number. My SIM card took a crap and I lost all my phonebook entries.

I'll give you a ride, but still breaking in the new clutch so no high RPM driving for a while... :(

Were you by any chance driving on Hwy 36 heading West bound around 9:15PM yesterday? I thought I saw your car, but was from the corner of my eye as I was heading East bound and didn't get a clear look.

No bently manual... Where could I buy the hoses and fittings? Ever place I go autozone napa etc. They don't have it.. All the have is like heater hose in those sizes. Where do you live?

Check at the dealerships to see if they have any in stock? But for what its worth, a lot of the hoses and fittings you can jimmy-rig yourself but you have to be pretty creative. I am in woodbury, i'm going over to Rosemount at 230 actually.

Today? are you busy tomm? cuz I can't do it today...

Oh yeah, today. I am not leaving until 430 now. Sorry.

Tomorrow Ive got plans until we are all set to go.. :az I have the Bentley manual on CD if you want it though..

Yeah I can't today, I can try to tackle it on my own thanks though. When/where is everyone meeting up before we go down there?

I might possibly be able to come, not untill like 9:30 though. So depending on how long you biyz will be out, I might show. I am still down for the German Car Festival next weekend though! :)

Not sure. I am stopping over to GJGM3's house but I believe he is having company at the time so he probably can't entertain too many people.

We really have found a designated spot on University, unless GJGM3 has something in mind already.

Boosted..that is usually when I get down there.. probably earlier this time around, but its just barely getting dark at that time. :thumbup:

So is everyone going to the checkers there around 830? On saturday?

Eric - Lets direct everyone to the park from the last meet and we can take the drive from there. Thoughts? I think the earlier we get to University the better chance we'll have of pegging a lot - better with greater numbers though.

Sorry guys, turns out I'm not going to make it this weekend.

But I AM planning on coming up next weekend for the German Carfest. Any interest in getting together at Uni next Saturday?

sorry this is totally unrelated, but how do you get the fuel rail off, oim in the middle of the mani install and yeh...

Sorry guys, turns out I'm not going to make it this weekend.

But I AM planning on coming up next weekend for the German Carfest. Any interest in getting together at Uni next Saturday? :shifty she cracked the whipped, eh? :D

96alpine, i have a pdf on OBD1 manifold install on an OBD2 car. Would that help you?

Download link:
http://www.flampy.net/g/bfc/manifold.pdf

Yeah I read that. I finally got the manifold out now I just have to re route the vac. lines ahh should be fun.. but i dunno if i can make it tonight the girlfriend is angry an me haha.:devillook

Give it a try. :D

Hope you guys had a good time this weekend, I ended up...getting layed ;) . But I would like to meet up with you guys at the German Car Festival this weekend. :)