if there's a dyno day coming up in the Baltimore area, please post details and count me in! (provided its reasonably priced)

My club often hosts dyno days at Pro-Motion in Fredericksburg, VA, an hour and a half or so from you, I'd imagine. $55 for 3 pulls, iirc.

Theres a racing shop just south of b-more right off 95 in Jessup that has a dyno. Its called TPC Racing. I have no idea what price is reasonable to you but they charge $200 for 3 runs. I've had my racebike dyno'ed several times for $35 bucks a run, so to me their price is outrageous. If you didnt want to wait for a dyno day I suggest you check them out because all they do specialize in is racing (mainly concentrate on porsches). The owner knows some shit about M3's too, he use to race them prior to switching over to Porsche. http://www.tpcracing.us/tpc_racing_services.html

My club often hosts dyno days at Pro-Motion in Fredericksburg, VA, an hour and a half or so from you, I'd imagine. $55 for 3 pulls, iirc.

Even tho the place I suggested is only 35minutes away, but your price is much more like it!! Nevermind my previous post.

if there's a dyno day coming up in the Baltimore area, please post details and count me in! (provided its reasonably priced)
I'd be interested as well, as long as it is a dynojet. NASA requirement.

The one I mentioned is a Dynojet.

The one I mentioned is a Dynojet.
Fredricksburg is too far for me.

Fredricksburg is too far for me.

Its a bit far from me too, unless its on a weekend I'm heading to Lake Anna, where my in-laws have a lake house.

I just talke to NGP in Aberdeen. They said it is $75 for 3 runs w/o AFR, and I think he said $95 w/AFR. He said if we can get at least 10 people he'd cut us some sort of a deal. Anyone interested?

Jessie-

What about using the butt dyno?

I just talke to NGP in Aberdeen. They said it is $75 for 3 runs w/o AFR, and I think he said $95 w/AFR. He said if we can get at least 10 people he'd cut us some sort of a deal. Anyone interested?

Definitely interested. $95 is a little steep, and I'd really want the AFR to go with it, but if we can get it down to say $75 or so I'm in.

It's funny, I just posted looking for a dyno day over on Audiworld and they said NGP had one last weekend! Looks like we missed out. :(

I'd be interested as well, as long as it is a dynojet. NASA requirement.

Jesse, when do you plan on having your first event?

I just talke to NGP in Aberdeen. They said it is $75 for 3 runs w/o AFR, and I think he said $95 w/AFR. He said if we can get at least 10 people he'd cut us some sort of a deal. Anyone interested?


I'm down if I'm in town.


Shit that rhymed.:)

Jesse, when do you plan on having your first event?
after the summer probably

June 4th at JE Import peformance. $65 for 3 pulls. Should be a good showing there that day.

June 4th at JE Import peformance. $65 for 3 pulls. Should be a good showing there that day.
link? are they a dynojet facility?

Theres a racing shop just south of b-more right off 95 in Jessup that has a dyno. Its called TPC Racing. I have no idea what price is reasonable to you but they charge $200 for 3 runs. I've had my racebike dyno'ed several times for $35 bucks a run, so to me their price is outrageous. If you didnt want to wait for a dyno day I suggest you check them out because all they do specialize in is racing (mainly concentrate on porsches). The owner knows some shit about M3's too, he use to race them prior to switching over to Porsche. http://www.tpcracing.us/tpc_racing_services.html
i live right down the street from TPC. its very nice to drive by everyday and see the hawt porsches they have outside :wow:

but that being said, they are definitely expensive as hell. they charge $400+ for corner balancing. fcuk that noise.

EIP Lots of VWs but
http://www.eiptuning.com/eip/dynoservice.html
not too expensive
close too only in Westminster

EIP Lots of VWs but
http://www.eiptuning.com/eip/dynoservice.html
not too expensive
That was my second choice. I just figured it would be easier for most folks to drive up 95. Either place is about the same distance from me.

EIP Lots of VWs but
http://www.eiptuning.com/eip/dynoservice.html
not too expensive
close too only in Westminster

Ah, memories

Disclaimer: I drove one of those rear wheel lifting silly cars :D

http://www.matey-matey.com/corrado-g60-pic3.jpg

June 4th at JE Import peformance. $65 for 3 pulls. Should be a good showing there that day.

JE Import Performance?? :laugh A few of us have been ripped off by him.:nono

Ah, memories

Disclaimer: I drove one of those rear wheel lifting silly cars :D

http://www.matey-matey.com/corrado-g60-pic3.jpg
I was a VW guy beforehand as well. Actually, someone on this board bought my old VR6.

I was too poor for a VR6 :(

JE Import Performance?? :laugh A few of us have been ripped off by him.:nono


How so? James is a stand up guy IMO. I've been going there with my brother since I was like 10 years old, never had a problem. He did 5 motor swaps for my brother and countless installs, dyno tuned 10+ times and never had a problem.



BTW, it's a Dynapack dyno.

How so? James is a stand up guy IMO. I've been going there with my brother since I was like 10 years old, never had a problem. He did 5 motor swaps for my brother and countless installs, dyno tuned 10+ times and never had a problem.

Apparently he likes to tell people their transmissions are bad so he can keep them for himself. I found out I wasn't the only one too.:nono

Yeah, real stand up guy.:rolleyes

Oh, ask him how he likes my H23 tranny and that S2000 tranny. :laugh

I was a VW guy beforehand as well. Actually, someone on this board bought my old VR6.
ahhh, the memories... I still miss my 98 VR6 and 4 scirocco 16v's...

ahhh, the memories... I still miss my 98 VR6 and 4 scirocco 16v's...
I had a 95 Jetta GLX. I sold it to someone who eventually bought an M3 and ended up on this board after he totalled it.

I had a 95 Jetta GLX. I sold it to someone who eventually bought an M3 and ended up on this board after he totalled it.
:rofl nice

I had a 98 GTI VR6. Boy did those things come with the crappiest tires from the factory...

:rofl nice

I had a 98 GTI VR6. Boy did those things come with the crappiest tires from the factory...
Yes they did, wheels and tires were the 1st thing I replaced.

Im in for A Dyno Day anywhere within 100 miles of DC. Im sure I can get at least 1 other to join me. $65 for three pulls with A/F sounds reasonable.

I'm in for anywhere that doesn't use a Dynapack

anyone?

I'm still in as long as I'm in town on the date. I want a dynojet though too.

I just talke to NGP in Aberdeen. They said it is $75 for 3 runs w/o AFR, and I think he said $95 w/AFR. He said if we can get at least 10 people he'd cut us some sort of a deal. Anyone interested?

NGP in Aberdeen? Where at exactly? Is it on 40?

NGP in Aberdeen? Where at exactly? Is it on 40?
About a minute off of 40, on Perryman Road (I think that is the name).

About a minute off of 40, on Perryman Road (I think that is the name).

Yep, from 95 you get off on rt 543 east (exit 80). Take this to rt 40 and turn right. Rt 40 north/east to right onto Spesutia Drive, then take it all the way to Perryman Rd and turn right. Follow the road (it makes a turn) for about 3/4 of a mile and NGP is on the right.

As before, I'm in if the price is $70 or less w/ AFR.

1. essejM3
2. Neon01

any way we can do one not North as fcuk?

any way we can do one not North as fcuk?

Sure, start a new thread. Mine said Baltimore area. Sorry man

Sure, start a new thread. Mine said Baltimore area. Sorry man
oh, didn't see that was the intended area.

Dave, come out to one at ProMotion sometime. Shoot me a PM / AIM for info.