Where do I find a DIY for changing my antifreeze??
Mully

Just finished change the coolant, hoses,belts and water pump.

just a simple change? Open expansion tank cap turn heat to full hot, undo plug pass side mid to front of engine, let drain it'll go EVERYWHERE. ake sure to change the washer on the block plug, and reinstall block plug. Open the radiator plug drain not as messy as block, reinstall plug. Add coolant/water mix, to expansion tank, let settle keep adding till fill at full cold. Start car, turn heater on high, let bleed a little. shut off top off, repeat. Then seal the expansion tank, and open the bleed screw, restart and bleed again. Bleeding it is a bitch and time consuming....