SOLD



I bought this kit about a month ago, and decided im going to buy another car, therefore I am not going to install this in my car. When I bought it the seller said it had 9,000 miles on it. I bought most of the stuff needed to make this kit complete, such as a 318 fan and fan clutch and a fan spacer. This kit will fit any S50/52 motor, and should also fit the M50/52 motor. Basically, You will need software and a few minor parts to complete this kit, such as a hose for the Water Injection, a few clamps for piping, and the vacuum hose to regulate the bypass valve and vacuum taps. I compiled a list of everything that is included below. If you have any questions, please feel free to ask.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8061729460



V2 supercharger with piping (piping was spray painted yellow before I purchased everything)
Moutning hardware
UUC Oil Filter cap for oil routing w/ stainless steel oil hose
Stainless Steel Oil Drain line (looks almost brand new)
Water Injection Setup w/ 5 different injector nozzles (believe it was a custom kit, since it does not have a brand name
Ford/Bosch #30 Injectors
Brand new Air Filter, never used
Brand New 3.33" supercharger pulley, just ordered from superchargersonline.com ( will include receipt) along with a slightly damaged 3.33" pulley (has a small nick out of 2 of the ribs)
Dinan Crank Pulley, I measured it and it is seems to be 5.25" from rib to rib
Bosch Bypass Valve w/ hoses
318 Fan, 318 Fan Clutch and an RMS Fan Spacer
Autometer A Pillar Gauge pod w/ Boost and Exhaust temp gauge, everything necessary to mount both minus a tap for boost/vacuum line
Supercharger Belt (part number is 6PK1420 560K6 followed by 01 55 02)
Electric Fan Relay thermostat switch, incase you want to run an electric fan setup

This kit is not absolutely 100% complete, but it includes most everything you need to get the kit installed and working minus Software and a few inexpensive parts. Here is a pic of everything included minus the 318 fan blade, which I am picking up this week from BMW.

http://img150.imageshack.us/img150/543/v2setup0030qm.jpg

Are you willing to sell the water injection separately? If so how much?

Are you willing to sell the water injection separately? If so how much?
I'd like to keep it part of the complete kit, so right now I have to say no.

All good, thank you for letting me know

wait, did this kit not sell on eBay or were you the one that won the eBay auction?

I won it, bought most everything needed to complete the kit besides software, and now I have decided not to install it.

i remember this on ebay too....

I won it, bought most everything needed to complete the kit besides software, and now I have decided not to install it.
Why not :(

I was very close to buying this kit...just not enough funds at the time (still not funds now either)

Would installation come with the package :devillook

How much would software be?

Would installation come with the package :devillook

How much would software be?

I dont have any software for the kit, although if you are OBD1 I know someone who could sell you an RMS Stage 1 chip for a really good price that would work well with this kit. If you are OBD2, you will have to find somewhere that can tune your ECU to work with the setup. I would highly suggest buying an aftermarket engine management system to get the most power and best tuning out of this kit.
I dont know any prices for software for an OBD2 car.

Can you email me, i can't PM. Where in the Bay Area are you located? Interested. Thanks.

Sent you an email

Is this kit still available?

I am very interested, and I just recieved my tax refund, so I have enough money now.

Very stoked about this kit, I just hope its available.

Please email me since I am new to the boards I can't PM.

My email is BisanCorp@aol.com

thank you

email sent

Sale Pending

Hey, do you still want to trade for Black Manual Vaders...If you are, I have some and would like to trade with you. Thanks. I live in the bay area, in campbell. My number is 408-499-1278, my email is TheGreatApaum@aol.com, any time is okay to contact me, night or day

BUMP, kit is still for sale.

What kind of discharge tube is that? Know what kit it came out of?

What kind of discharge tube is that? Know what kit it came out of?
No, it doesnt have a name or anything on it.

BUMP, price is negotiable.

Anyone interested before it goes to ebay? Im willing to do $2875 SHIPPED. I will list it Monday if no one is interested by the end of the weekend.

On ebay if anyone is still interested http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8061729460

Anyway I can pay with direct credit card?

Not paypal...???

Cant think of a way that would work. What wrong with using a credit card through paypal?
You can send me a personal check, I'll just wait a week for it to clear.

im VERY interested... (as a 'hold me over' :devillook )... but i have a few questions.

Im running the Euro Oil Cooler. How will this effect the Oil to/from the SC unit, etc?

How many miles are on this blower unit it-self. I just really done want to have to rebuild it/buy a new one. Just slap it on and go :D


Thanks!

im VERY interested... (as a 'hold me over' :devillook )... but i have a few questions.

Im running the Euro Oil Cooler. How will this effect the Oil to/from the SC unit, etc?

How many miles are on this blower unit it-self. I just really done want to have to rebuild it/buy a new one. Just slap it on and go :D


Thanks!

Im not sure about the Euro oil cooler, you will have to ask some other members who are running that setup about it. The seller I bought this kit from told me that the blower has 9K miles on it. The supercharger does have some wear marks on it, since it was used. The compressor wheel spins very freely and had no shaft play whatsoever. You should not need to do a blower rebuild.

Sold