Selling a complete Dinan powerdyne supercharger system for OBD1 (1995 M3). This is probably the most complete used SC system you will find. I went through Dinan's installation instructions, identified every part listed and cross-checked them against my system. The only items not included in the kit are the 1/4" thread-serts, four 1/4"x1/2" bolts to mount the cruise control unit in front of the ecu, and a few wave washers. Everything else is included, including a print out of Dinan's installation instructions, and the checklist I used to identify the parts. The parts are associated to the instruction step number and they have been bagged and labeled according to the step number.

The SC unit was rebuilt by Powerdyne and has the cooling holes and screen upgrade. The unit has about 6000miles on it since the rebuild. I made 340-350 rwhp and 270-280 rwtq on two different 3.0L engines with this SC running the stock 6.5/7.0 psi pulley. The engines did run headers, TEC III, and dynospot cams.

The system includes:

SC unit and all brackets and hardware
All inlet and discharge piping and connectors and hardware
Fuel Injectors
ECU chip
Brackets for relocating charcoal canister and cruise control unit.
Hoses for charcoal canister and throttle body heater
Air Filter
SC unit cooling hose and filter
PVR hose assembly and filter and checkvalve
Crank pulley
Fan extender
SC belt
Turbotronics 10 - modifies signal from airflow meter for high-fow injectors

Pictures can be viewed at: http://public.fotki.com/gwrichardson42/1995_bmw_m3_coupe_parts/supercharger/

I am asking $2900 plus shipping. The components have been packaged and boxed and are ready for shipping. The box weighs 45lb and the size is 18x24x12. My zip is 94089, so you can go to FedEx or UPS and calculate the shipping costs.

Thanks,
Gary

I wish I had the money. Good luck.

would you consider 2500 shipped?

is there anyway i could make this work on an OBD II?



JEFF

is there anyway i could make this work on an OBD II?


I can't say for certain, but most of the hardware should transfer directly. You'll definitely need to do something about the software, either a stand-alone system, different chip, or custom tuning...won't be CARB legal though.

-Gary

I have new 24lb injectors with my Schrick CAM kit - would you consider a lower price -- without the injectors...?

Or are they larger?

I have new 24lb injectors with my Schrick CAM kit - would you consider a lower price -- without the injectors...?

Or are they larger?

The Dinan kit comes with 28.8lb injectors. The box is already packed and taped up, so I really don't want to open things back up and take things out.

One option would be to buy the kit as is and sell your 24lb-ers to re-coop some of your money...just a thought.

The price I sent you in the email is pretty firm.

-Gary

The Dinan kit comes with 28.8lb injectors. The box is already packed and taped up, so I really don't want to open things back up and take things out.

One option would be to buy the kit as is and sell your 24lb-ers to re-coop some of your money...just a thought.

The price I sent you in the email is pretty firm.

-Gary

would you take payments if i offered you 3k plus shipping?

would you take payments if i offered you 3k plus shipping?

Unfortunately, I haven't had very good luck with payment plans. If I still have this after a month or two, I may entertain the idea of payment plans, but until then I'll have to pass.

-Gary

please tell me the chip for the kit will work with a 413 dme...

Yes is this for a 413 DME???

And can the kit be used in conjunction with an aftercooler?

Sold.