Do you think this will work with my car? The car says it's prewired for it in the trunk if that helps. Thanks for any info., Andrew


http://cgi.ebay.com/ebaymotors/bmw-e36-e34-e32-car-alarm-keyless-entry_W0QQcmdZViewItemQQcategoryZ46093QQitemZ46107 21816QQrdZ1QQsspagenameZWDVW

It should work but you can get a much cheaper system aftermarket.

It should work but you can get a much cheaper system aftermarket.

Such As???

in your e34...the control unit goes under the rear passenger seat (drivers side). Click the following link for more pics and info: http://www.cardomain.com/ride/739005/3


http://memimage.cardomain.net/member_images/7/web/739000-739999/739005_33_full.jpg

http://memimage.cardomain.net/member_images/7/web/739000-739999/739005_32_full.jpg

Thanks Qsilver7! I would have to get it programed at the dealer correct??

i usually do alarms installed with keyless entry for $175, look on craigslist or check with local stereo shops, remote start pager alarms are great to have also.

Thanks Qsilver7! I would have to get it programed at the dealer correct??
No, you can program it yourself...it's very easy. If you go back to my other post...I inserted a link to my cardomain site that has copies of the instructions for the BMW/Alpine keyless entry system.

All you need to do with any new remote is...remove the chip inside the remote fob...place it into the control unit (which reprograms the chip)...then place the chip back into the fob.

Here's a few of the instructions (new or replacement chips aren't necessary if the fob already contains one...only need new ones if the old ones are missing):
http://memimage.cardomain.net/member_images/7/web/739000-739999/739005_24_full.jpg
http://memimage.cardomain.net/member_images/7/web/739000-739999/739005_25_full.jpg
************************************************** ***********
http://memimage.cardomain.net/member_images/7/web/739000-739999/739005_27_full.jpg

Click the following link for more pics and info: http://www.cardomain.com/ride/739005/3
sweet :cool :cool :cool I didn't have the supplimental alarm manual in with the rest of the paperwork when I bought the car and of course all the printing is worn off of my buttons. :thumbup: