View Full Version : Feeler FS: engine parts & more
sunir 01-11-2006, 05:56 PM these parts would be available around mid Feb.
1) Schrick camshafts for e36 M3 (S50/S52)
2) CSS custom chip (for 93 octane, made to work with the above cams, Euro HFM, 24 lb injectors, and CAI) from custom tuned on the dyno by Chuck Stickley and Brant...this is not an off the shelf chip
3) US 3.2 L headers
4) 5 point Simpson race harness (3" shoulders, 2" lap/sub)
please make some reasonable offers...
joenationwide 01-11-2006, 06:05 PM these parts would be available around mid Feb.
1) Schrick camshafts for e36 M3 (S50/S52)
2) CSS custom chip (for 93 octane, made to work with the above cams, Euro HFM, 24 lb injectors, and CAI) from custom tuned on the dyno by Chuck Stickley and Brant...this is not an off the shelf chip
..
is the chip for OBD1 or OBD2?
also, is it for 3.0 or 3.2L?
selling 24# inj. too?
jkuper 01-11-2006, 06:17 PM Guess you bit the bullet on Sunbelts
is the chip for OBD1 or OBD2?
also, is it for 3.0 or 3.2L?
selling 24# inj. too?
OBDI. Sunir's car is a 95 M3 LTW. It's a chip that he has not an ECU flash for an OBDII.
sunir 01-11-2006, 06:21 PM is the chip for OBD1 or OBD2?
also, is it for 3.0 or 3.2L?
selling 24# inj. too?
its for OBD 1...can be used with 3.0 or 3.2 L bottem end...like an S50 or a 3.2L OBD1 conversion
jkuper 01-11-2006, 06:26 PM OBDI. Sunir's car is a 95 M3 LTW. It's a chip that he has not an ECU flash for an OBDII.
Oh, but that means it only fits a LTW :eyecrazy
sunir 01-11-2006, 06:29 PM Oh, but that means it only fits a LTW :eyecrazy
its for any OBD 1 :) ...but the fact that it was in my LTW makes it special:stickoutt :redspot
So Sunir... whatcha got cookin' for the car?
sunir 01-11-2006, 06:48 PM So Sunir... whatcha got cookin' for the car?
lil summ sum as our boyee queenzee would say;) :stickoutt
Sunir wants to change his setup since all the racers at Starbucks know what's under his hood. :D
lil summ sum as our boyee queenzee would say;) :stickoutt
NOS!!!!11!one!!1!!
http://www.steventech.com/doboy/dangertomanifold_steven.swf
sunir 01-11-2006, 07:53 PM lets keep on topic guys...seriously any newcomer is not gonna know what all jokes are and I want to find a buyer....
thanks:)
LTrain 01-11-2006, 11:50 PM $100!
MikeHsu 01-12-2006, 02:12 PM price on the schricks.
sunir 01-12-2006, 03:00 PM price on the schricks.
$950 o.b.o for the pair (local)
vjlax18 01-13-2006, 02:30 PM Sunir, what are you doing? The Sunbelt cams will cost you $2000+ and they haven't proven to make any more power then Schricks. And your Schricks aren't installed "straight up" so you're going to make more power then a normal Schrick install.
sunir 01-13-2006, 02:52 PM Sunir, what are you doing? The Sunbelt cams will cost you $2000+ and they haven't proven to make any more power then Schricks. And your Schricks aren't installed "straight up" so you're going to make more power then a normal Schrick install.
good point...but I've seen several examples of race cars (both prepared class cars and mod level...with at least one mod car that runs a 2.9L US engine...) that put up some impressive dyno figures with these cams...so that leads me to believe that they could be the way to go...even last time I was talking to Chuck at the track in Nov, he was saying how impressed he was about 'em...I dunno man :dunno
///Mracer 01-13-2006, 04:22 PM what build date is your LTW?
give me a package deal price on items # 1 and #2. Will CSS be doing your de-install?
sunir 01-13-2006, 04:29 PM what build date is your LTW?
give me a package deal price on items # 1 and #2. Will CSS be doing your de-install?
I'll do cams for $950 (for the pair, cams used for only one year and installed correctly so no damage to them...these cost me just about $1300 new for the pair) and chip for $450 (it's acustom tuned CSS chip to work with my setup...cost me $800 for the tuning and dyno...Stickley and Brandt tuned the car)
LTW build date is 10/95
lemme know...
///Mracer 01-13-2006, 04:34 PM I'll do cams for $950 (for the pair, cams used for only one year and installed correctly so no damage to them...these cost me just about $1300 new for the pair) and chip for $450 (it's acustom tuned CSS chip to work with my setup...cost me $800 for the tuning and dyno...Stickley and Brandt tuned the car)
LTW build date is 10/95
lemme know...
thanks, I will think about it.
sunir 01-13-2006, 04:37 PM thanks, I will think about it.
no prob Matt...hope all is well buddy:)
vjlax18 01-13-2006, 05:09 PM Brandt
There is no "D" we've gone over this before Sunear.
sunir 01-13-2006, 05:14 PM There is no "D" we've gone over this before Sunear.
lol yeah your right...ya got me:stickoutt ...I'm so used to writing 'brandt' for some reason...I think when I wrote him a check for services rendered the first time that's what i wrote and it just stuck...
mentalbc 01-17-2006, 10:15 PM Hey dude those cams a lot more back when you bought them. Now they've come down in price. If you want to trade something for them or need some work done for them, lmk.
BraNt
Hey dude those cams a lot more back when you bought them. Now they've come down in price. If you want to trade something for them or need some work done for them, lmk.
BraNt
Ha ha
Owned!
essejM3 01-17-2006, 10:53 PM Ha ha
Owned!
please stay on topic in sunirs threads Jed :rolleyes
please stay on topic in sunirs threads Jed :rolleyes
Jess. Need some cams?
mentalbc 01-18-2006, 12:06 AM I hate John for this!:devillook
vjlax18 01-18-2006, 08:15 AM Fix your car list. Oh and turn off Private Messages too because you're going to get the "OMFG it's TEH BraNt!!!" PM's.
sunir 01-18-2006, 12:28 PM Ha ha
Owned!
right:rolleyes ...very nice Jeddy...
moving along to more important issues...
Hello Brant, how r u doing? hope all is well:) ... it sucks that you're getting to me now...I would liked to have had you do the work but it seems like I've had a hard time getting in touch with you, perhaps you've been really busy or something. Anyhow I've hired someone else to do some recent work on my car...I talked to Chuck in Nov at SPR and sent him a few emails, the last of which he was going to ask you if you could do the work for me...after that I didn't hear back about your/his status in terms of working on my car...I guess this is the busy season.
If you'd like to have the cams you can buy them from me. If I have them around still the next time I need work done, I can trade them for labor hours based on an agreed amount.
thanks man...:)
schosports 01-18-2006, 12:44 PM I hate John for this!:devillook
I hate John too. Does he ever work? Does he even have a "job"? He's always calling me for parts and for my daughter to teach him how to drift :rolleyes
vjlax18 01-18-2006, 01:15 PM :devillook
Mad Dog 20/20 01-19-2006, 03:03 PM Sumbelch cams remain folklore at this time. Sunir be a gamblin' mang. After dominating CR as a rook, he now wants to play around with his race-proven motor.
I say stick wit da schrick sticks , mang.
Sumbelch cams remain folklore at this time. Sunir be a gamblin' mang. After dominating CR as a rook, he now wants to play around with his race-proven motor.
I say stick wit da schrick sticks , mang.
Queenz? Did you hack Garrett's account?
Mad Dog 20/20 01-19-2006, 04:39 PM Queenz? Did you hack Garrett's account?
Yous know howz we do in da NYC, son. :stickoutt
|