1) AEM CDI: looking for $800 shipped OBO
This unity is fully PNP for OBD2 cars (OBDI cars require splicing into wiring harness) and simply plugs into the factory coil harness. I bought the unit new and did all the wiring myself. I put a lot of effort into making the install look clean and overall do a good job. All connections are soldered/heatshrinked and the wiring is covered in red heatshielding, factory rubber gromets were used to cover the wires leading to the coilpack clips, the valve cover ground, etc. Also included are 6 Honda CBR 954RR ($50 each new) coils and Denso IK22s with .030" gap (total $100 new).
http://forums.***************************************?attachmentid=130510&stc=1&d=1128801742
http://forums.***************************************?attachmentid=130511&stc=1&d=1128801754
3) AA Stg1 Piping and IC: $400 + ship
This is the piping and IC from an AA Stg1 Gen 1 or 2 kit. All piping from filter to IC, IC to TB is included allong with recirculating valve.
http://forums.***************************************?attachmentid=130514&stc=1&d=1128801795

how much hp can the ic support?

The IC and Piping are tenatively sold to me. :)

Hey I PMed you. Let me know what the AA chip is tuned for like turbo, injectors, and which build date and car and the things we talked about. Check your PM.