Okay guys (and gals... if any....)
Upon a very heart wrenching decision, I have come to the conclusion that my E21 is too fargone as far as rust. Since I am leaving for the Navy come December, I've decided to part out my car. I have a few good parts and equipment for the car so if you have anything you need let me know. The list that follows is one of minor detail, so if you don't see anything, just ask.

(3) M10 blocks
-one built and ready for install
-the other two of which will need some R&R
(2) complete cylinder heads (1,8i) including manifolds
-Various Urethane bushings (steering rack, front sway bar and Tie rod dust covers)
(2) front grill assemblies (pictures on demand)
(1) 5 speed trans
(1) 4 speed trans
-drive train assembly (non lsd and 5 spd driveshaft)
Recaro seats (ehhh.... they're not bad. Very nego)
(2) sports steering wheels

...okay, everything minus the carpets and headliner....

PM me for details and pics

My 323i had way more rust. I have been to your site and the car looks like you could keep it - with mimial rust/

But, If you are really parting your 320i and it has a sunroof, I could use all 4 sunroof tubing and the clips. I take it the headliner is already out, so you can have access easier to this.

BMW lists this as NLA. There are two front, two rear tubes to drain water. I also need any clips or hardware used to secure them.

thanks
Joe

shocks? And how much for recaro's ball park?

I looked at your website and my car had more rust, just look at it now...
http://img282.imageshack.us/img282/976/320i1309yi.jpg

I am in Colorado, and interested in the 5spd, Recaros, 5spd d-shaft, maybe some other things. Where in CO are you?

Interested in the front sway bar mounts. What diameter are they for?

I would be interested in the urethane steering rack bushings. Please email price with shipping to 43113

I am in Colorado, and interested in the 5spd, Recaros, 5spd d-shaft, maybe some other things. Where in CO are you?

On his web site it says Parker, Co.

I looked at your website and my car had more rust, just look at it now...
http://img282.imageshack.us/img282/976/320i1309yi.jpg
I weas really interested in getting it restored, however since I just signed for 5 years, I don't want to rent a storage unit for 5 years. Not only that, but I never got the title for the car when I got it (...bastard...), so I just decided to salvage what I can and ditch the chassis. It'd make a good race car, but I don't have the capital for an investment like that.

The pics on my site don't show the floor boards, or the rear shock towers (I think...) I have about 2/3rds of the left rear shock tower missing and about half on the other side. The driver side floor board is rusted through under the clutch pedal, while the passenger side is almost in the state of the driver's side.

Soooo.... The mounts?

shocks? And how much for recaro's ball park?
The fronts are gone. Blown. Kaput. But the rears are KYB gas-a-just. They're in fair shape, not to swell, but they work just fine. I'll have pics up Sunday as I forgot my digi this morning when I went to my shop. I also have a Haynes manual, if anyone wants it. Make an offer. Wheels are good and just right for the upcoming season as they have brand new snow tires. 185/70R13 Winter Master Plus'. The Recaro's are sold.

Soooo.... The mounts?
Stock size, but sold. sry

you have PM

need a 1980 1.8 cylinder head

Just to let you guys know, before I sell anything, I will be posting pictures of what I have. I would rather you guys know exactly what you're buying. I'll be posting pics Sunday afternoon. I've got a drift day at Colorado National Speedway on Saturday.

-Matt

Stock size, but sold. sry

Damnit

Do you have the control arms and are they fairly new?

how much for trans shipped to 60448?

If your car has/had A/C I will buy the wiring harness. From the fan switch to the center console. I ripped my A/C stuff and cut some of the wires...

Fuel Pumps!!!!! Pm Me If U Still Have Them!!!