Its for E36 Coupe, made of Fiberglass the quality of this Part is simply amazing.

Comes Primed and Ready to paint and with the install hardware.
$140 Shipped in the lower 48.
Ebayers are charging this for Greyhound shipping

http://www.rmcbmwcca.org/pictures/FunBMWPix/airborne.jpg
http://i20.ebayimg.com/03/i/04/7b/9d/73_1_b.JPG

ouch, what happend to that lightweight? =(

Hmm. Does your version have the brake light? I'm assuming no. I'd like to see some shots of the rear where the sides of the wing meet the trunk. I wanna make sure it lines up perfectly before I'd consider buying it. I've been interested in one for a long time, but I'm in no position to drop close to 1g for a wing. :rolleyes

no brake light.
Here give me 15 min i'll post pics up

Aww no love for us 4 doors? I would've taken myself out of the lip spoiler and jumped on this if it had also been for us sedans.

any chance of the tall version??

There is the mounting kit which includes the hardware, And Drilling Guide which Helps you know where to Drill the holes in the Trunk.

Its very simple. You place the guides in the Bolt Holes of the Spoiler Position the spoiler untill its in the Right Spot. Tape the Ends that stick out. Lift the Spoiler up and Drill

http://img196.imageshack.us/img196/1939/picture0112pe.jpg
http://img196.imageshack.us/img196/8724/picture0127nw.jpg
http://img196.imageshack.us/img196/9811/picture0135to.jpg
http://img196.imageshack.us/img196/2657/picture0141rf.jpg

sorry no love for 4 door.

In the Fall . I will Order the High and Low Carbon Fiber Spoilers. I expect 20 Low and 10 High.
and about 20 Low Fiberglass spoilers

I used to own one of those fiberglass LTW replica spoilers and tested them on both a 2dr and 4dr. Apparently, they lined up perfectly for both cars.

The one I got was from fleabay.

Well Then It fits. They all are Moulded from the OEM part

OMG, that is such a good deal! If I didn't have one, I'd get one. :)

For the record, how many do you have Steve?

just one.
The Factory Rep was leaving the US and wanted to clear the warehouse of samples so i am passing the savings on to everyone else

sorry no love for 4 door.

In the Fall . I will Order the High and Low Carbon Fiber Spoilers. I expect 20 Low and 10 High.
and about 20 Low Fiberglass spoilers
Thanks for the super speedy reply. :) Now that you mention it, I'd prefer to have a cf one. I've always wanted to do a candy coat to it, so you could still see the weave thru the blue paint. :love1

here is the quality of my CF products finish
thats from a Audi A4 Spoiler
http://img226.imageshack.us/img226/3465/picture0104ga.jpg

here is the quality of my CF products finish
thats from a Audi A4 Spoiler
http://img226.imageshack.us/img226/3465/picture0104ga.jpg
Is there anyway I can sign up for one of the low cf versions when they come out later in the year?

hahaha i didn't know what i was looking for in that picture u used steve...

but now we really know... that wing is light weight.

thats Correct phil. According to that Pic that spoiler reduced the Weight of the car by about 3,200lbs

Depending on price, I'd be interested in the CF low! :D

^What he said.

i have a standard m3 spoiler right now would the holes line up with the ones i have now or would i have to redrill thanks.

I am Not sure but if you unbolt you Soiler and compare it to these then we will know

The Holes on each side, Center to Center are 6 inches apart
width wise 47 inches apart for the front
and 45.5 Inches apart for the back.
The Rear Holes sit about 1.5 Inches Back from the End of the Trunk

Carbon Low Will Run For $375ish.
If 10 People Got them And were willing to pay once 10 people signed up. I could have them in your hands with in 6 weeks i'd let them go for $330

they will fit 4 dr. i just purchased a low version in CF from bekkers for 325.

they will fit 4 dr. i just purchased a low version in CF from bekkers for 325.
thanks for alerting everyone :)

Still have this one if no one here takes it its going up on ebay on thursday

are the holes in that one the same as for the oem ltw?

are the holes in that one the same as for the oem ltw?
that i cant be 100% on but the whole spoiler is Molded from the OEM part so i would think so

i don't believe the OEM spoiler and any lightweight spoiler holes match up. I am almost certain of this.

sold