I'm going to dyno my car on saturday at speedworks. I called and they are not having a dyno day and they are open for dynos. I did not ask about the price but probably $45 since its a non dyno day. If someone wants to dyno their car I will have the T hooks that you need.

new mods? Or was this the ecu thing?

new mods? Or was this the ecu thing?


new mods and I got my software issue resolved.

Have fun dynoing alone!!! ;)

I'll go and watch.

I did mine last Thursday... it's called HPP Racing now, and $50 bucks a pop. Their A/F calibration seemed to have been fixed though.

$50 for 3 runs? wtf I was thinking more along the lines of $40-45. $50 is a little steep for THAT shop. I might still go there because all of my dynos have been from there. I could really care less if i'm the only one that dynos. The offer is out there if someone wants to come dyno.

Mohammad 224/190??!?!! VERY nice. Did you get my pm?

sigh, cant make it...i'll be in houston this weekend. And the following weekend is the DIY day. Are they open just about any time for dyno?

oh well...i'm curious to see your numbers....i guess our only difference is the software and u have the m50 right?

ur car sounds good in the video.

what exhaust is chris gant (cg) running?

sigh, cant make it...i'll be in houston this weekend. And the following weekend is the DIY day. Are they open just about any time for dyno?

oh well...i'm curious to see your numbers....i guess our only difference is the software and u have the m50 right?

ur car sounds good in the video.

what exhaust is chris gant (cg) running?


Chris Gant is running Stromung. I have dibs on it when he sells it :) if he does

Chris Gant is running Stromung. I have dibs on it when he sells it :) if he does

can i vote Ray as the dibmeister?
U dont like your AA?

what time and where is this place located? exactly?
:help

can i vote Ray as the dibmeister?
U dont like your AA?

actually I remove my dibs as I just bought a stromung :)

what time and where is this place located? exactly?
:help

Its in lewisville (972) 395-9844 414 Holfords Prairie Rd
Lewisville, TX 75056

I'll be there around 11:00

$50 for 3 runs? wtf I was thinking more along the lines of $40-45. $50 is a little steep for THAT shop. I might still go there because all of my dynos have been from there. I could really care less if i'm the only one that dynos. The offer is out there if someone wants to come dyno.

Mohammad 224/190??!?!! VERY nice. Did you get my pm?
Ray.. thanks man. Yeah, I was hoping to hit something like that :) . How does your car feel right now with new mods & SW? I did get your PM.. it's still not in my hands, I'll know by this week for sure.

Yeah.. I thought it was little steep also. But, they took care of my car pretty well; had to move 4 cobras out of the bay to get mine in. Also since I didn't get time to get the t-hooks from u... they were very "gentle" with the tightening of the straps.

Ray.. thanks man. Yeah, I was hoping to hit something like that :) . How does your car feel right now with new mods & SW? I did get your PM.. it's still not in my hands, I'll know by this week for sure.

Yeah.. I thought it was little steep also. But, they took care of my car pretty well; had to move 4 cobras out of the bay to get mine in. Also since I didn't get time to get the t-hooks from u... they were very "gentle" with the tightening of the straps.

the car feels really strong. I can't wait for the dyno.

Man I'd like to go but lewisville is about 1hour away from me....I always get lost around 820/121/183 etc. etc......too far for me. Have fun! Maybe next time. :buttrock

Man I'd like to go but lewisville is about 1hour away from me....I always get lost around 820/121/183 etc. etc......too far for me. Have fun! Maybe next time. :buttrock


where do you live? I'm in ft worth and can get there in 35 mins. I would like to find a different shop but all my previous dynos are from them so i'm going to get this one on the same dyno as well.

I live on the edge of ft. worth/saginaw...Marine creek prkway area/exit Old Decatur Road to be exact.....are you near?....$50 to run eh...how many?....if your near I'll follow you and dyno with you....its hard for me to find a place I've nevered been before....still new around here came from Virginia. Never really went anywhere.....sighing. :(

There is a new race shop about 3-4 miles east of Ft Worth on 121. Its on the south side of the street. It looks really nice. I will try to stop by there some time next week and check it out.

I live on the edge of ft. worth/saginaw...Marine creek prkway area/exit Old Decatur Road to be exact.....are you near?....$50 to run eh...how many?....if your near I'll follow you and dyno with you....its hard for me to find a place I've nevered been before....still new around here came from Virginia. Never really went anywhere.....sighing. :(

You have a grey coupe? I think I've seen it around SH 199 a couple of times. I go to school off of Marine Creek so I'm pretty sure I've seen your 325 around.

I live on the edge of ft. worth/saginaw...Marine creek prkway area/exit Old Decatur Road to be exact.....are you near?....$50 to run eh...how many?....if your near I'll follow you and dyno with you....its hard for me to find a place I've nevered been before....still new around here came from Virginia. Never really went anywhere.....sighing. :(


you're about 5-10 mins away from me.

There is a new race shop about 3-4 miles east of Ft Worth on 121. Its on the south side of the street. It looks really nice. I will try to stop by there some time next week and check it out.


PEPE find this place and tell me if they have a dyno and ask them how much.

I will probably still go to speedworks because all my dynos are from there. I need to drop some stuff off at mikes house anyways and get my pads!

They have a in-ground Dyno you can see if from 121 when the garages are open

hmmm... is it on 121 before 121 splits towards grapevine?

Doug, is it SpeedTek Performance?

does it look like this

http://www.speedtek.net/images/stores/haltom/haltom-bar_07.jpg
http://www.speedtek.net/speedtek_contact.html#haltom

looks like it

$65 for 3 pulls on a Dynojet. dyno days min of 10 cars for $35each 3 pulls.

so u dynoing or heading to TWS?

Time for another dyno day. $35 is nice. It would also be nice to cross reference Speedworks.

I'd be down for a dyno day in the near future if I can get a damn chip that won't take 500 cranks to start the damn car! :mad

I won't be able to dyno this w/e. I'll be at TMS.

I'd be down for a dyno day in the near future if I can get a damn chip that won't take 500 cranks to start the damn car! :mad

I won't be able to dyno this w/e. I'll be at TMS.


is it this saturday and sunday? I might go watch since its 5 mins from my house.

so u dynoing or heading to TWS?

wont be able to go to TWS.

Im auto-xing this weekend :devillook

is it this saturday and sunday? I might go watch since its 5 mins from my house.



wont be able to go to TWS.
The regionals are on Friday and Saturday and the Nationals are on Saturday and Sunday. I'm just racing on Saturday.

From what I can tell, SCCA is a little weird when it comes to spectators. They give us each 4 free pit crew passes, which I have to specify names for, and at this event they are also giving 4 spectator passes which apparently lets you into some part of the grand stand.

If you don't have a pass, you have to pay to get in, I think... Not quite sure of the exact details, because this is my first race.

I don't know if a spectator pass will allow you into the infield or not.

If you want to come watch on Saturday, let me know so I can get a pit crew pass for you. PM me your full name.

does it look like this

http://www.speedtek.net/images/stores/haltom/haltom-bar_07.jpg
http://www.speedtek.net/speedtek_contact.html#haltom
Ive driven by there

Anybody interested for next week or maybe nest next week?

I am down for a dyno run. Always wanted to know what my car would pull.

its $50 for 3 runs. He said to be there around 12-1 as he has an appointment at 11. Its probably going to be just me up there.

its $50 for 3 runs. He said to be there around 12-1 as he has an appointment at 11. Its probably going to be just me up there.
Negro, just do it next week. Unless you like doing things by yourself, then go for it.

i'm in memphis next that weekend. I need to know how my new software is. I could care less if anyone else goes up there, the offer was out there for someone to use the thooks.

Howd it go?

Howd it go?

http://bimmerforums.com/forum/showthread.php?t=355362