Hey everyone,

We are pleased to bring you sale on E36 and E46 carbon fiber gauge cluster trims on behalf of our Featured Store, Bimmian. The normal price is $90, for a limited time only they are $58.99 for top items!!! They are easily applied using 3M adhesive tape that is supplied with your order.

This real carbon fiber cluster trim is an excellent way to make your vehicles interior look exclusive.

It covers the plain black background around the gauge area complimenting the sporty look of gauge rings or gauge faces. (also available from bimmian.com)

Our trims are made from flexible, self adhering carbon fiber with flawless weaving and are available in both black and silver carbon fiber.

Our carbon fiber trim comes with pre-applied 3M adhesive for long lasting adhesion to gauge area. Easily installed through gauge holes, the trim has all openings for signals, gauges, knobs and displays perfectly precut for optimum fitment.

No permanent modifications are required to your vehicle to make installation of this product possible.


E36 Customers Click Here (http://www.modbargains.com/product.asp?pf_id=bimmian5)


E46 Customers Click Here (http://www.modbargains.com/product.asp?pf_id=bimmian30)


http://www.modbargains.com/prod_img/bimmian30_1096693424.jpg

https://st12.flashecom.com/modbargain/images/Products/carbon-fiber-cluster.jpg

https://st12.flashecom.com/modbargain/images/Products/carbon-fiber-cluster2.jpg

https://st12.flashecom.com/modbargain/images/Products/carbon-fiber-cluster3.jpg

https://st12.flashecom.com/modbargain/images/Products/carbon-fiber-cluster4.jpg

If you can't remove the plastic screen, how the heck do you get that in there. Obviously, it is doable and has been done. I'm just trying to think how you get the entire panel on? Your add says through the guage holes...I'm guessing this panel is very thin and bends so you can fold it through the holes?

If you can't remove the plastic screen, how the heck do you get that in there. Obviously, it is doable and has been done. I'm just trying to think how you get the entire panel on? Your add says through the guage holes...I'm guessing this panel is very thin and bends so you can fold it through the holes?
You have to completely remove the entire gauge cluster by removing the screws that hold it in. Then you can take off the clear piece of plastic to install this piece. Pretty straight foreward but time consuming.

The complete install guide can be viewed here:

http://www.bimmian.com/elements/page.htm/instructions.ht/CCT/CCT.pdf

Bump

Mike, these instructions don't seem adequite! Can you help out?

They sell these on ebay for half the price.

They sell these on ebay for half the price.

That's not the point. I've got one and I can't get it installed!

Hi old thread welcome to 2007.