View Full Version : Dyno Day pics/results
QuestMCoupe 03-05-2005, 06:04 PM Post your pics and results here.
It was cool meeting some new people. I made 232rwhp and 211 rwtq :rolleyes . Big thanks to Ray (Hinz) and Bruce for helping install the ERT crank pulley. Here are my pics:
http://www.jmw-motorwerks.com/pics/dday1.jpg
http://www.jmw-motorwerks.com/pics/dday10.jpg
http://www.jmw-motorwerks.com/pics/dday11.jpg
http://www.jmw-motorwerks.com/pics/dday9.jpg
QuestMCoupe 03-05-2005, 06:04 PM http://www.jmw-motorwerks.com/pics/dday8.jpg
http://www.jmw-motorwerks.com/pics/dday7.jpg
http://www.jmw-motorwerks.com/pics/dday6.jpg
http://www.jmw-motorwerks.com/pics/dday5.jpg
http://www.jmw-motorwerks.com/pics/dday4.jpg
http://www.jmw-motorwerks.com/pics/dday3.jpg
http://www.jmw-motorwerks.com/pics/dday2.jpg
QuestMCoupe 03-05-2005, 06:05 PM I was able to snap a pic of this beast as it was exiting. That exhaust sounded sweet!
http://www.jmw-motorwerks.com/pics/Gallardo.jpg
Michael-Dallas 03-05-2005, 11:58 PM Sounds like you guys had fun. If I showed up, then I wouldn't have seen this bad boy at Plucker's at Lower Greenville Ave (and the picture does not do it justice!):
gobuffs 03-06-2005, 02:46 AM my $5900 E30 M3 made 164 hp. Very good for 100k mile motor and it being basically neglected for the past 5 years.
Pepe240sx 03-06-2005, 02:48 AM 125whp owns you bitches.
hinzm3 03-06-2005, 03:21 AM Post your pics and results here.
It was cool meeting some new people. I made 232rwhp and 211 rwtq :rolleyes . Big thanks to Ray (Hinz) and Bruce for helping install the ERT crank pulley.
NP on the crank pulley, YOU did all the work :D
HP wise your car is just about normal but I have no clue on the low tq numbers.
125whp owns you bitches.
you're an idiot, stop posting here.
Greg S 03-06-2005, 03:40 AM Weird, I saw an elise on the way home.
Freudefahrer 03-06-2005, 04:21 AM If I had gone to the dyno day, I wouldn't have lost my camera on Mr Freeze or Batman. Not sure which one, but I lost it on one of them....
125whp owns you bitches.
Me = 3 x Pepe
Now who owns who???? :confused
Pepe240sx 03-06-2005, 01:45 PM :( :(
stuntride 03-06-2005, 05:05 PM my $5900 E30 M3 made 164 hp. Very good for 100k mile motor and it being basically neglected for the past 5 years.
is that ur project car??
s54gasm 03-06-2005, 05:22 PM Me = 3 x Pepe
Now who owns who???? :confused
375 WHP DAMN!!!!!
sweet car man, still hasnt sold yet?
CABimmer 03-06-2005, 05:25 PM 375 WHP DAMN!!!!!
sweet car man, still hasnt sold yet?
Baaah.
gobuffs 03-06-2005, 05:27 PM is that ur project car??
Nope...I paid even less for that one. It is sitting in my garage with the motor in it (engine not in running condition yet though) waiting for a cage. I hope to get it running by the end of the year.
stuntride 03-06-2005, 05:46 PM Nope...I paid even less for that one. It is sitting in my garage with the motor in it (engine not in running condition yet though) waiting for a cage. I hope to get it running by the end of the year.
cool, what numbers do u think the one for sale would put out?
CABimmer 03-06-2005, 05:47 PM cool, what numbers do u think the one for sale would put out?
Bruce it was around 220 rwhp wasnt it?
gobuffs 03-06-2005, 09:01 PM It was actually 210...which means 250 at the crank. I could put around $7k more into the motor and get around 250 RWHP (300 crank) I am guessing.
Doug you might be thinking of my 95 M3 that had 223 at the wheels (bone stock).
CABimmer 03-07-2005, 12:04 AM I remember you changing chips with mark W and gaining a few extra hp
375 WHP DAMN!!!!!
sweet car man, still hasnt sold yet?
Actually it made more than that! :buttrock
Pepe240sx 03-07-2005, 10:39 AM I think it's safe to say that the highlight of the day was seeing a Grand Am being carried by a bulldozer :lol :lol
weaksauce 03-07-2005, 11:21 AM I was a little more than disappointed to see my wifes vette only turn out around 300/300. I know it's stock, but damn. The A/F was bellow 10 till the last run where it finally showed back up on the graph. :(
SecretAznSauce 03-07-2005, 01:31 PM jeff, when did you show? I left around noon
weaksauce 03-07-2005, 02:28 PM jeff, when did you show? I left around noon
I saw you. You were working on Mo's car when I left. I was going to say hi, but you were deep in conversation. I guess I should have done a white smoky burnout as I left to announce my exit. I was there at a little after 11 stayed till almost 1. I went right after the E34 540 and right before Jacob, I think....
stuntride 03-07-2005, 09:32 PM It was actually 210...which means 250 at the crank. I could put around $7k more into the motor and get around 250 RWHP (300 crank) I am guessing.
Doug you might be thinking of my 95 M3 that had 223 at the wheels (bone stock).
cool i would like to take a look at it sometime, i might be in the market soon
torquey 03-07-2005, 10:48 PM I saw you. You were working on Mo's car when I left. I was going to say hi, but you were deep in conversation.
So deep that he took my keys with him back to Arlington :embarrasm
stuntride 03-07-2005, 11:14 PM Actually it made more than that! :buttrock
i thought u car was making almost 450??
SecretAznSauce 03-08-2005, 01:11 AM So deep that he took my keys with him back to Arlington :embarrasm
nono, we were going to frisco, get it right man :rolleyes :D
i thought u car was making almost 450??
With a T60-1, it would.
stuntride 03-08-2005, 02:37 AM then lets see it haha
then lets see it haha
Selling or would have already had it on there. Made 385 rwhp anyway.
Greg S 03-08-2005, 02:44 AM Selling or would have already had it on there. Made 385 rwhp anyway.
I thought the most u made was 376 and change?
I thought the most u made was 376 and change?
My highest was 385 rwhp. They did not print that one out for me. Too bad I cant go off uncorrected numbers....
luckytopher 03-08-2005, 11:31 AM 153/153, then 160/153...
curves aren't very smooth.. not happy about that...
also having a CEL for cyl4-6 knock sensor so gonna run some cleaner + 93octane chevron for a tank or two then reset to see if it goes away...
i'll take it though
Greg S 03-08-2005, 12:25 PM http://photos.e46fanatics.com/data/500/18197rpm.jpg
///M P0WER 03-08-2005, 04:49 PM great pics. Scho... did you get any dyno sheet at all from any of the runs? Please post. Thanks :buttrock
great pics. Scho... did you get any dyno sheet at all from any of the runs? Please post. Thanks :buttrock
I have all the dyno sheets. I will post them up tonight. I spun the tires on the dyno the first 2 runs. After that, we hooked up and got some good pulls. Ranges from 375-385 rwhp.
Juan ///M325 03-08-2005, 04:59 PM I have all the dyno sheets. I will post them up tonight. I spun the tires on the dyno the first 2 runs. After that, we hooked up and got some good pulls. Ranges from 375-385 rwhp.
Were all your pulls in 4th gear?
Were all your pulls in 4th gear?
Yes.
gobuffs 03-09-2005, 12:28 AM cool i would like to take a look at it sometime, i might be in the market soon
If all goes right the car (E30 M3 2.5) will be sold by the end of the week.
stuntride 03-09-2005, 12:34 AM If all goes right the car (E30 M3 2.5) will be sold by the end of the week.
as soon as i find a car i like it ends up sold less than 7 days later, damn
as soon as i find a car i like it ends up sold less than 7 days later, damn
It has been for sale for months.
stuntride 03-09-2005, 02:20 AM haha you sly guy......my lambo is still for sale too but everything i could afford ends up sold, mike i would love to buy your car but its just too much for a student like me
|