who offers wheels for 320's and also what is the offset because i know we have the same bolt pattern as a civic but i think the offset is drastically different.

Let me know and also give links to websites if you have them.

Thanks in advance,

RvS

Tirerack.com has 2 versions of 15x7. The e21 offset for 15x7 is 12 or 13mm, hondas usually have 40-42mm offset. Panasport will make them, very nice but pretty expensive.
ken

www.tirerack.com
they have two listed for e21 but I think you could fit e30 wheels correct me if im wrong guys

www.tirerack.com
they have two listed for e21 but I think you could fit e30 wheels correct me if im wrong guys


E30 rims have an offset of 25mm (standard). You will need a 10-15 mm hubcentric spacer to use e30 rims.

Yes, I run e30 bottle caps on my '78 (on my '82 for a year also) with .370" spacers in the front and .300" spacers in the back. No problems at all. They do require longer bolts, I use 43mm from Turner Motorsports.

Side note: Anyone know the offset for 325ix wheels?

ken

325ix BBS wheels are ET41

325is BBS wheels are ET30

325i Bottlecaps are ET35

Al

Side note: Anyone know the offset for 325ix wheels?

....Somebody is looking to use a set of 15in baskets weaves.... :stickoutt

price?

i've been informed of ppl using wheels with an offset of up to 20mm with no trouble, but that is hearsay, not something I've actually seen myself.

I have 15x7 enkei's et20. The the front rim is very close to the tie rod end/steeringarm. It will depend on the rim profile design and width. The rear is close to the arm, but its the only way to fit 225's in the rear w/o major mods.

Nurse hand me my bat!!!