:firedevil

Eurobahn announces Holiday Software Sale.! Save 15% off normal pricing on all Superchips Software. Contact your local Eurobahn Dealer for pricing and installation schedule!

Eurobahn
(818) 381-6335

do you have one for a 95 m3 with a 3.5 inch hfm. thanks

do you have one for a 95 m3 with a 3.5 inch hfm. thanks

Hi Frank,

WE have access to a great Chip for your car. The cost is 269.00 and the max power gain is about 23.7 RWHP. Torque will increase to 22.5 Ft. Lbs. These numbers were gotten by using 93 octane Super Unleaded.

Let us know if we can order one for you,

Jeff
Eurobahn

yes you can. give me a few days though, ill get back with you probably on monday, i have out of town business. thanks for the quick response. and by the way, what brand is the chip, and i need it for 21# injectors. thanks again.

Jeff

Do you do the install? How much for one for a 99 528i?

Also do you have any intakes? If so, how much?

Darrin

Sounds Good Frank! Give us a call when you are ready.



Jeff

Do you do the install? How much for one for a 99 528i?

Also do you have any intakes? If so, how much?

Darrin

Darrin the discounted price for your 528 is 529.00 installed plus tax. The air box on your car flows cool air at a good rate, but the weak link is the filter. We recommned the AFE superflow filter. This lifetime filter comes with a cleaning kit and will flow 60% more air than the stock filter. The xmas sale price is $54.00 including the cleaning kit.

Let me know where in California you are to see who is the closest to do your tuning.

Jeff
Eurobahn

Is shark considered software? Do you carry that for my E46 328?

Is shark considered software? Do you carry that for my E46 328?

Shmoo,

The Shark Injector is a type of off the shelf software programmer. We do not carry that. All of our software is written specifically for a given BMW. By doing that we can get the best safe power for your individual vehicle. This allows us to modify more of the programming to get you a better drive. The Shark is a good product for people who only want a better throttle response and to remove the speed limiter. What Superchips does is to give you those two things plus more HP and Torqe as well.


Jeff
Eurobahn :evil2

How much is the software for e46 325?

Hi, do you have superchips for a Mar 2003 build 325i?

Hi, do you have 99 m3 chip and how much? thanks

Shmoo,

The Shark Injector is a type of off the shelf software programmer. We do not carry that. All of our software is written specifically for a given BMW. By doing that we can get the best safe power for your individual vehicle. This allows us to modify more of the programming to get you a better drive. The Shark is a good product for people who only want a better throttle response and to remove the speed limiter. What Superchips does is to give you those two things plus more HP and Torqe as well.


Jeff
Eurobahn :evil2

Jeff, what kind of gains will we see with the 2.8 motor in the e36 328?

Thanks

Hi, do you guys make chips for a 94 325is w/ s50 cams,??

If I were to buy one burned for a 3.5'' HFM for my '95 and down the road I get some cams and injectors, how much would you charge to reburn the chip for me?

Jeff, what kind of gains will we see with the 2.8 motor in the e36 328?

Thanks

id like to know also

Jeff, what kind of gains will we see with the 2.8 motor in the e36 328?

Thanks
I found this link from the Superchips site:

E36 2.8L dyno (http://www.superchips.co.uk/curves/bmw328.pdf)

I spoke with their Houston dealer last night.. and they weren't aware of the 15% off special, but when I mentioned it, he was very willing to honor that. According to Joel .. they send the "DME file" from your specific car to Superchips, UK and they modify it for the best gains, send it back to be to the US dealer to be uploaded. Kinda like Eurospeed and AA. But $599-15%= $510 + tax is still kinda steep.

I found this link from the Superchips site:

E36 2.8L dyno (http://www.superchips.co.uk/curves/bmw328.pdf)

I spoke with their Houston dealer last night.. and they weren't aware of the 15% off special, but when I mentioned it, he was very willing to honor that. According to Joel .. they send the "DME file" from your specific car to Superchips, UK and they modify it for the best gains, send it back to be to the US dealer to be uploaded. Kinda like Eurospeed and AA. But $599-15%= $510 + tax is still kinda steep.

yah thats pretty steep for a stupid 13hp

Been needing some software for a while. Can a get a price check on a chip for a 2001 330Ci current mods include a BFP CAI and UUC TS3 exhaust. Couple of questions though. Are these chips are "transparent" to the dealer scan tools? What would happen if they reflashed w/ an updated program? :help Had that happen w/ my GIAC chip for my '02 GTi. TIA

Aloha,
Ian

im gonna give you a call tomorrow and ill purchase a chip. i just have a few questions first. thanks alot

yah thats pretty steep for a stupid 13hp


No kidding. The oringinal/base dyno started at 194HP too, which is more like crank HP for a 328i, unless they are doing the 330i. So I think 206HP is crank. even if it's WHP, that a lot for $500!

Do you guys carry anything for a 95 318?

renegade-- thats the nicest ass ive seen in a while. wow. :stickoutt

renegade-- thats the nicest ass ive seen in a while. wow. :stickoutt

http://forums.bimmerforums.com/forum/showpost.php?p=3274526&postcount=100

wow. :D

How long will this last? I want some software for my 2003 ZHP but in an email reply you sent me you said that wouldn't be available until the end of January...

i do know my local dealer here said you guys had already hacked the ecu.. i'm hopeful!

where are these 95 chips coming from, you say you have a 'source' for them. I'm just curious whose tuning it is. On another note, Renegade, where did you find that ass pic? I NEED more!