Ok, guys
this is my GB

URI crank pulleys from Race tech

they were nice enough to set it up for a 5 min.. so i need at least 4 others if not more

e36 URI OBD II @186$ Shipped (reg 210@ RT and 238@URI)
e36 URI OBD I @226$ Shipped (reg 240@ RT and 285.60@URI)


PM if interested
if you guys care pay me directly i have paypal RKitOut@triad.rr.com


i need at least four more buyers combined either OBD I or II

1)RkitOut
2)
3)
4)
5)

thanks
Carl

Im in

1)RkitOut
2)Spahrman5 (OBDII)
3)
4)
5)

pmed you

1)RkitOut (OBII) paid
2)Spahrman5 (OBDII) payment pending
3)
4)
5)

thinking about running this thing until friday... let me know guys

I had crank pulley put in last week, the car pulls hard. :eek:

I'm going to dyno the car thursday, i'll post the results.

I posted in the other thread. PM me about payment...I am in!

1)RkitOut (OBII) paid
2)Spahrman5 (OBDII) payment pending
3)Cozmo Kraemer (OBD1)
4)
5)

1)RkitOut (OBD II) PAID
2)Spahrman5 (OBDII) PAID
3)Cozmo Kraemer (OBDI) PAID
4)Supabimma (OBD1) PENDING
5)

BTW Guys 5 is not the max. number
i'll run couple orders the first group and maybe another if enough interest...thanks

guys that have already paid...

thanks for you promptness,
a UPS tracking will be sent to each of you within 24 hrs of the fifth unit being paid for ....

Ok, guys

e36 URI OBD I @226$ Shipped (reg 240@ RT and 285.60@URI)



Are those real dyno numbers on OBDI M3?

NVM those are prices.

DO you have dyno numbers?

do a search and you will find tons of info on this subject. I think the pulley is good for 5-10 hp at rear wheels.

Justin

10hp - 10lb/ft dyno proven at the wheels time after time. There is tons of info on the subject, it is a very good modification one that you truely can feel.

1)RkitOut (OBD II) PAID
2)Spahrman5 (OBDII) PAID
3)Cozmo Kraemer (OBDI) PAID
4)Supabimma (OBD1) PAID
5)

I may be in, let me get back tomorrow once I do some figuring . . .

10hp - 10lb/ft dyno proven at the wheels time after time. There is tons of info on the subject, it is a very good modification one that you truely can feel.

Makes you wonder why theses didnt come stock. Anyway if i can justify the money ill be in. We'll see. Too bad you couldnt get a better discount for more people.

nope.. no better discount its already at wholesale and its already at 60$ off for OBD II and includes shipping...

This is a smokin deal! I almost bought a used one for this price. One more person has to jump on this!

what is the difference b/t obd I and II pulley? which would i need for an obd I 3.2

what is the difference b/t obd I and II pulley? which would i need for an obd I 3.2


not to be rude, but your joking right ???

i mean with close to 3k posts i think you should know... :confused

not to be rude, but your joking right ???

i mean with close to 3k posts i think you should know... :confused

Not joking, that was rude BTW. I know more than most about these motors, having swapped, taken appart and fixed various, e36 motors, and do not know the difference for AFTERMARKET pulleys between OBD I and OBD II. I have an OBD II motor with OBD I conversion. Additionally, since when did post count = knowing anything about cars?????? ;)

obd1 has a timing ring. That big gear looking thing.

obd2 just comes with the pulley.

You guys will need new belts, too.

This is an awesome mod especially on autos.

obd1 has a timing ring. That big gear looking thing.

obd2 just comes with the pulley.

You guys will need new belts, too.

This is an awesome mod especially on autos.

Thanks Eric

Not joking, that was rude BTW. I know more than most about these motors, having swapped, taken appart and fixed various, e36 motors, and do not know the difference for AFTERMARKET pulleys between OBD I and OBD II. I have an OBD II motor with OBD I conversion. Additionally, since when did post count = knowing anything about cars?????? ;)

im sorry if i offended you, i did not intend to do so. i apologize
perhaps the wording of the origianl question caught me off guard, it seemed somewhat elementary....

again i'm sorry

as for the answer, eric is right...
obd I
http://unorthodoxracing.com/cgi-bin/merchant2/0202002.jpg
obd II
http://unorthodoxracing.com/cgi-bin/merchant2/0202102.jpg


i think the pulley itself is the same

one quick thing. i have obdii. and my stock pulley had the timing ring on it.so you cant just look at it and tell the uri does'nt.
and its an awesome mod.

One more person, someone needs a pulley!

one quick thing. i have obdii. and my stock pulley had the timing ring on it.so you cant just look at it and tell the uri does'nt.
and its an awesome mod.

That is what i was thinking

Carl, no problem, no offense taken. As far as I am concerned OBD I swaps have never and will not be elementary. I am learning new stuff all he time, OMFG, i couldn't survive without this forum.

One more person, someone needs a pulley!

I DO!
Help me out though... I've never done a group buy before.... how does this work? Where/how do I pay?

Thanks, this rocks!

1)RkitOut (OBD II) PAID
2)Spahrman5 (OBDII) PAID
3)Cozmo Kraemer (OBDI) PAID
4)Supabimma (OBD1) PENDING
5)M3Cosmos (OBD II) PENDING (?)

pmed

1)RkitOut (OBD II) PAID
2)Spahrman5 (OBDII) PAID
3)Cozmo Kraemer (OBDI) PAID
4)Supabimma (OBD1) PENDING
5)M3Cosmos (OBD II) PAID


Rock on.... looking forward to this.

pmed

please email or pm any remaining interst

I didn't know this would close so quickly...at just 5? Anyways, I've decided to resurrect my US 3.0L so I want in on this.

PM'd you, RkitOut.

Check you paypal, Carl. ;)

received