OK gents, Hot Dyno Nights are getting too damned cold, so we are moving to a once a month Saturday format for the winter months. Saturday November 20th will be our first weekend event. We anticipate a large turnout, so please reserve a spot on this thread or via email or a phone call to the shop.

Same rules:
$85 for 3 runs with air fuel,Tshirt, food. We'll be starting at 9am and going until around 5pm or whenever the last car is done.

*BONUS*I am also going to arrange for a dent pro to be there and give discounted rates, so please let me know if you need some dents removed!

hmmm I have a bunch of small dings that I want out... Erik it depends on how much he will charge per Ding.

i should be there and would be interested in the ding guy

Erik I heard you were sticking an N62 into your M3? Hows the swap going?

I will have pricing on the ding guy later today with any luck.

The M62 is ready to go, the oilpan is being Tigged up this week so that I can run it as a dry sump and get the engine as low as possible. Then we mock everything up, fabricate motor mounts and start on the headers. Probably gonna be the end of the year before its running and tuned on the dyno. Then we have have to prep it for paint and get all that done.

yea i need some small dents out, ill be there

WoooOOoot WooOOooOOot.....whos down??

Hmm...maybe I'll see if the dent guys can work their magic on my poor E30. Obviously, I'll be there.

so whos going??? :(

Just one week to go! Dent guy info should be available soon, see you all there!

OK folks, here are the dent guy details:

$85 for the 1st panel, $60 for the 2nd panel, and $35 for additional panels. Panels are like "Drivers Door" or "Rear Right Quarter"

This is a significant savings from his normal rates and he does TOP NOTCH work. He is planning on being there from 9am to 1pm. I need to have confirmation if you are interested in having work done so he knows if he needs to bring another guy.

Sign up here, or email me. Thanks!

OK folks, here are the dent guy details:

$85 for the 1st panel, $60 for the 2nd panel, and $35 for additional panels. Panels are like "Drivers Door" or "Rear Right Quarter"

This is a significant savings from his normal rates and he does TOP NOTCH work. He is planning on being there from 9am to 1pm. I need to have confirmation if you are interested in having work done so he knows if he needs to bring another guy.

Sign up here, or email me. Thanks!
wow! i assume you can have any number of dings removed from one panel for $85? that sounds pretty good...i think i've previously seen prices per ding, rather than panel. i'll check my schedule, but i'll be sure to post again if i can make it.

Hey Erik,

Can you find out if the ding repair guy will try and fix motorcycle gas tanks? They're single walled and no worry's on gas vapors, haven't had gas in them for months.

Thanks
Alvin

I might be able to come.

are you gonna dyno the silver beast carlos???

I will likely swing by around lunchtime with a friend. We'll both bring our cars (e36 M3 x2). I'm curious to see what my new top end does for dyno results, and this will be a baseline for my friend. I'm also curious to see where my A/F is at lately.

-Brad

I would like to come by for a dyno, but I'm not sure if I'll be in town. Can I sign up tentatively?

Mike

You bet, no problem, we should have space for you!

are you gonna dyno the silver beast carlos???
Car is officially done..... the only problem is that I hadnt had any time to go pick it up.... I was hoping to pick it up this weekend but I doubt I'll have any time either... Im thinking I'll pick up the day b4 thanksgiving.

damn cant wait..........

Doh! It turns out I will be in NY for work. Please cancel my spot Erik-- hopefully I can make the December date.

Mike

I will have pricing on the ding guy later today with any luck.

The M62 is ready to go, the oilpan is being Tigged up this week so that I can run it as a dry sump and get the engine as low as possible. Then we mock everything up, fabricate motor mounts and start on the headers. Probably gonna be the end of the year before its running and tuned on the dyno. Then we have have to prep it for paint and get all that done.


That is AWESOME!!!!! Can't wait to see it when it's done.

I need to know for sure how many folks want dents removed. I am looking at about 6 of you so far. Please respond here by end of day and let me know so I can line him up. Thanks!

Erik

Car is officially done..... the only problem is that I hadnt had any time to go pick it up.... I was hoping to pick it up this weekend but I doubt I'll have any time either... Im thinking I'll pick up the day b4 thanksgiving.
If you need someone to drive one of the cars back up... I'm available... :D

Steve

Hi Erik,

If your dent person can fix the motorcycle tanks I have 3 to bring in. I may also have him fix 1 panel on my wife's car.

Thanks
Alvin

If you need someone to drive one of the cars back up... I'm available... :D

Steve

:complain Damn it Steve, you beat me to it, but "I'm" partial to the M5, I'm a 5er kind of dude. :D

Keith

:complain Damn it Steve, you beat me to it, but "I'm" partial to the M5, I'm a 5er kind of dude. :D

Keith
Sup Keith... havent seen you in the "Freezin Dyno Nights". I might swing by for a bit...

Steve, thanks for the offer... but Im dying to drive the sucker....

BTT< see you all there!

Sup Keith... havent seen you in the "Freezin Dyno Nights". I might swing by for a bit...

Steve, thanks for the offer... but Im dying to drive the sucker....

Sup 'Los, hope to see ya tomorrow, Alan & I will be there around 12-12:30, will be meeting up with Cliff and the rest of ya. :buttrock

L8er,

Keith :cool

Is there going to be a December Edge Dyno Day? I missed the November one due to a business trip :(

Thanks,
Mike

We will be resuming Dyno Days in January, probably around the middle of the month. Though, if you need some dyno time, just give us a call, we can get you scheduled.