http://www.nexternal.com/uuc/?Target=products.asp&ProductID=305

UUC/SSBC are pleased to annouce the availability of the Generation 2 caliper in our Big Brake Kits and a special promotion authorized by SSBC on all models (E46/E36 3-series and M3, E36/7/8 M Roadster/Coupe, E34/E28 5-series and M5, E38 7-series, E24 6-series and M6).

For more technical details and pics, please click here (http://www.uucmotorwerks.com/ubbk).

For a limited time only, purchase the complete 4-wheel big brake kit (355mm front, 328mm rear) and save $300 off the complete package.

4-wheel kit normal price: $3750

4-wheel kit promotional price: $3450
(New Gen2 kits will ship within 2 weeks of ordering.)

To order, please click here:

http://www.nexternal.com/uuc/?Target=products.asp&ProductID=305

Kits include:
• 4-piston Gen2 calipers front and rear (choice of red, black, silver).
• 355mm front rotors, 328mm rear rotors.
• stainless steel lines.
• performance brake pads.
• all necessary brackets and hardware.


Generation 2 enhancements include:
• Fully internalized piston seals for added heat capability. This reduces the posibility of burned seals when used under "race" conditions.
• Revised caliper construction for firmer pedal feel.
• New silver powdercoat finish option (previous finishes still available - red and black).
• The new internal seal (stainless steel) pistons.

New silver powdercoat finish:

http://www.uucmotorwerks.com/UBBK/brake_info/caliper_silver_1.jpg

More eye candy:

http://www.uucmotorwerks.com/UBBK/GTR_M3/DSC03348.jpg

http://www.uucmotorwerks.com/UBBK/GTR_M3/DSC03350.jpg

http://www.uucmotorwerks.com/UBBK/brakepix/UBBK_355_NW.jpg

http://www.robertlevinson.com/seven/take_a_look/images/ext_UBBK_polished2.jpg

I just ordered my UUC BBK can't wait.

Thanks Rob for providing a great GB :redspot :

Just received the front kit .... They rock! :buttrock

any idea if the 14" fronts would fit behind a 19" ACS type III wheel with the ACS 7mm spacer? I know most brakes wont fit with these wheels but noticed that the 14" brakes need alot less clearance than the 13" brakes.

any idea if the 14" fronts would fit behind a 19" ACS type III wheel with the ACS 7mm spacer? I know most brakes wont fit with these wheels but noticed that the 14" brakes need alot less clearance than the 13" brakes.

Those wheels really are a troublesome fit with any brake kit... they barely clear the OE calipers!

I think you may still need a spacer, probably swapping that 7mm spacer with a 15mm or 20mm spacer, effectively giving you 8mm or 13mm more room.

- Rob

would the 355 front kit and the regular rear kit fit over staggered SSR GT3's??
ps. - i saw the avus blue m3 w/ the GT3's and they cleared, but im not sure whether there were 355's on the front or not..

would the 355 front kit and the regular rear kit fit over staggered SSR GT3's??
ps. - i saw the avus blue m3 w/ the GT3's and they cleared, but im not sure whether there were 355's on the front or not..

(Sorry for the delay in answering - never got the notification of this post!)

What size GT3s are you using? 17". 18"?

- Rob

any idea if the 14" fronts would fit behind a 19" ACS type III wheel with the ACS 7mm spacer? I know most brakes wont fit with these wheels but noticed that the 14" brakes need alot less clearance than the 13" brakes.
I have 355 fronts with type IIIs and no issues. In the rear they just BARELY touched and the smallest spacer I could get was 5mm. (With which the clearance was fine at about 5mm :stickoutt )