tdc
05-26-2004, 08:36 PM
Together with EuroSpeed Performance (www.eurospeedperformance.com), we are able to offer a DYNO DAY at Bimmerfest East 2004: DRIVEN!!!
EuroSpeed will be bringing their DYNAPACK dynamometer which is the safest and one of the most accurate dynos available.
The Dynapack Chassis Dyno is currently the most advanced chassis dyno available in the United States. It uses a hydraullic loading mechanism to precisely measure the torque being generated at the drive wheels. It's so sensitive that it can sense a change in power when the headlights are turned on!
The drive wheels are removed and special adapters are attached directly to the hubs. These adapters are then slid into the hydraullic loading pods and the car is ready to go! No straps and no tire slip to worry about! We then run the car and can accurately measure horsepower and torque, along with air/fuel ratios and boost. The control unit can then plot any of the four against each other based on time or rpm.
Each dyno spot will be $100.00 with a guaranteed TWO PULLS.
However, Bimmerfest East & EuroSpeed are able to offer a GROUP RATE of $75.00 if we have 20 or more cars registered!!!
<CENTER>THAT'S A 25% SAVINGS!!!</CENTER>
Please e-mail dyno@bimmerfesteast.com to register! You will then receive e-mailed instructions regarding payment.
If you have any questions, feel free to e-mail info@bimmerfesteast.com and put DYNO in the subject line so we can direct it correctly for a timely response.
See you all at Bimmerfest East 2004: DRIVEN (www.bimmerfesteast.com)
EuroSpeed will be bringing their DYNAPACK dynamometer which is the safest and one of the most accurate dynos available.
The Dynapack Chassis Dyno is currently the most advanced chassis dyno available in the United States. It uses a hydraullic loading mechanism to precisely measure the torque being generated at the drive wheels. It's so sensitive that it can sense a change in power when the headlights are turned on!
The drive wheels are removed and special adapters are attached directly to the hubs. These adapters are then slid into the hydraullic loading pods and the car is ready to go! No straps and no tire slip to worry about! We then run the car and can accurately measure horsepower and torque, along with air/fuel ratios and boost. The control unit can then plot any of the four against each other based on time or rpm.
Each dyno spot will be $100.00 with a guaranteed TWO PULLS.
However, Bimmerfest East & EuroSpeed are able to offer a GROUP RATE of $75.00 if we have 20 or more cars registered!!!
<CENTER>THAT'S A 25% SAVINGS!!!</CENTER>
Please e-mail dyno@bimmerfesteast.com to register! You will then receive e-mailed instructions regarding payment.
If you have any questions, feel free to e-mail info@bimmerfesteast.com and put DYNO in the subject line so we can direct it correctly for a timely response.
See you all at Bimmerfest East 2004: DRIVEN (www.bimmerfesteast.com)