View Full Version : FS: OEM Headlights, Custom Sub Box, & Misc - Looking For Local AZ Buyers


PAGALM3
05-02-2004, 05:33 PM
I finally found some time to try and clear out my garage of everything that has been sitting in there for the last couple of months. And instead of throwing everything away, I'm hoping that someone else can find a loving home for all this stuff. :D I've quoted some prices, although I'm willing to negotiate if there is a need. :)

• BMW OEM E46 M3 Headlights (Non-Xenon)
These are actually being sold on eBay, so check out the auction if interested.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2476876105
http://members.cox.net/tomasjcarrillo/Misc/hl_front.jpg

• Custom Ported Subwoofer Box for E46 cars (and of course whatever else it will fit in!) - The box was made out of 1" MDF for high power applications (JL Audio 12w6v2's) & cost around $300 to build. I'm willing to part with it for $150. The dimensions are 22lx30wx15h (see pic below for more info)
http://members.cox.net/tomasjcarrillo/Misc/sub_box.jpg

• E46 Trunk Battery Cover - This has one of the tabs cut off (boxed area in pic), other than that there's nothing wrong with it. I'll let it go for $10.
http://members.cox.net/tomasjcarrillo/Misc/Battery_Cover.jpg

• Remote Battery Lead Terminal - These are brand new items that I bought but didn't end up using. The BMW PN are 61.13.8.367.769, 61.13.8.387.540, 61.13.8.377.630, & 61.13.8.371.011. I'll ask $6 for all the pieces.
http://members.cox.net/tomasjcarrillo/Misc/Battery_Terminal.jpg

• Harmon Kardon Subwoofer & Subwoofer Amp - The whole unit was actually used as part of my stereo install, so here are some of the parts that were left over. I have no idea what to charge for this, so just make an offer if interested.
http://members.cox.net/tomasjcarrillo/Misc/hk_subs.jpg
http://members.cox.net/tomasjcarrillo/Misc/HK_SubAmp.jpg

• E46 passenger side trunk panel - This panel has holes from a stereo install, I've attached a pic with all the holes highlighted. From the front, you have to do some searching to find the holes, that's why I took a pic from the backside. I'm looking to get $15 for this.
http://members.cox.net/tomasjcarrillo/Misc/Trunk_Panel.jpg
http://members.cox.net/tomasjcarrillo/Misc/Trunk_Panel_Holes.jpg