I have converted to the Euro blinkers and have adopted the fact that they only flash and dont stay on with the driving lights like the US models. They are the 2-wire setup rather then the 3-wire. What options do I have to make them run with the driving lights? I have an idea of drilling in a new set of smaller bulbs to have on with the running lights and using the bigger current bulbs for flashing. Any other idea would be appreciated.

tucked

!

looks nice, but why you want them to stay on? can the light socket fit in the euro housing? that way you can just switch wires and not have to drill a hole.

cant switch sockets they are 2 totally different animals. The US bulbs have 2 elements in them and the Euro's have only 1 this means the sockets are different and require a different wiring pattern... :rolleyes:

http://forums.***************************************?attachmentid=62355&stc=1
uhhh, u suck! lol

what were we talking about again? lol, oh yeah, my suggestion would be to hit up your local parts store & see if they sell any dual fillament turn signal bulbs in that same size u have in ur euro lamps........if there is such a bulb, there should be such a harness. or if ur decent w/ bending little bits of metal & soldering, u can make your own dual fillament harness (i wouldn't cut the euro housing to try & fit a bigger harness)

What he is talking about it thatthe euro ones only have the blinkers and no parking light, he needs to add an extra bulb and socket, the small kind, thats what I had to do.

oh yeah....doh, was reading it too fast.