Will only the ford racing injectors work on BMWs?
http://store.summitracing.com/product.asp?d=18&s=108&p=631&searchtype=ecat

Or can i use this other brand, accel?
http://store.summitracing.com/product.asp?d=18&s=108&p=3858&searchtype=ecat

And i was also wondering if the AA gen1 stg1 kits come with 30lb or 36lb injectors?
If i have 30lbs, im getting new injectors now, and tuning after that, so should i just go ahead and get the 36lb now, or would that be too much?

Thanks for helping me out.
-Dan.

i tried running 40lb injectors on my stage 1 tuning and boy did it run like ass, was way rich, youd probably wanna use what AA uses
since they control the injectors with their tuning

yea but i'll get my car tuned for the 36lb injectors, wondering if i they would not flow enough if i upgraded later on to 20g and possibly lowered compression.

The Ford 30's will easily support up to around 320-330rwhp on the BMW 6-cylinder. If you plan on running more power than that, then get bigger injectors. Ideally you want to run the smallest injector that will support your expected horsepower.