For December, RRT is offering its Barry Battle original Brake Backing Plates at 20% off List Price. Offer ends December 31st! Made in the USA The original and best Brake Backing Plates by Barry Battle. Originally conceptualized and designed by RRT's co-founder and President Barry Battle back in 1997, these backing plates feature a 3" inlet duct, durable powder coated finish, and the added convenience of leaving your wheel bearings untouched unlike other brands. Our backing plates are used on many of the top racing BMWs in SCCA Pro / World Challenge, SCCA Club Racing, BMW CCA Club Racing, and also on hundreds of street/drivers school cars. We have plates available for the E30, E30 M3, E36, and E36 M3. Plates for all models of the E46 including M3 will debut in 2004!

CLEARANCE SALE on RRT Rear Shock Mount Reinforcements
These are designed by RRT and manufactured in the USA from laser-cut steel and powdercoated for excellent corrosion resistance. These plates are available for the E36/E46 and also the E30. Several sets are still in stock. Only $20.95 per pair.

Please check out our other offerings at http://www.roadracetech.com.

Thanks for looking! :redspot

In definitely, how do I pay?

I am interested too.

Thanks for your interest, guys. You can call our office 9A-5P Mon-Fri and either I or Barry will pick up. We accept Visa, MC, Discover, and American Express. I would not send credit card info over email or PM.

We have PLENTY of E36 M3 plates in stock!

We also have the CEET 2-layer 3" duct hose, 3" couplers (recommended for driver's school cars that also see street use), and bumper ducts for cars that don't already have them.

Thanks!

So James what is the price total for the plates and the tubing etc? I don't think I need the bumper ducts as I was going to run these through fog light delete panels which I have already.

The total price for the kit minus the ducts (perfect for E36 M3s) is $336. The kit price still reflects the 20% discount on the plates. Price for the kit with ducts is $376, and that does include the 20% discount on plates as well.

I have been fixing our website all day. I got halfway through uploading changes when our satellite based Internet went haywire. I apologize for the inconvenience, but I have fixed the entire brake products page and all associated links.

Thanks, guys!

wait, quick clarification,

on the website it says that you don't need bumper ducts if you have the factory bumpers w/ ducts...but i didn't think the interior opening of the OE ducts are round to actually accomodate a duct hose...

am i crazy ? i thought the outlet was vertically rectangular cause thats how it looks inside the fender well ? :dunno

or am i missing a connection point in the bumper

jeff

Hi Jeff,

You have to cut the original brake duct in the E36 M3 front bumper in half. It is about 10-12 inches long, so cut it right down the middle so you have just the front 5-6 inches left. You then shove the 3" CEET duct hose into the plastic duct.

You then simply drill a hole in the duct to replace the air temp sensors. One sensor is thin and long (for the OBC, I believe), and the other is a disc. Use a Dremel or other tool to make the hole large enough for the disc-shaped sensor.

BTW--Full directions on how to do this will be posted on the website shortly.

Thanks for your interest!

I met up with Barry the other day and saw the backing plates. They are very, very nice. I was planning on putting these on in the spring, but I had to give myself the early christmas present when I saw them. I couldn't pass up the sale price! Anyway, free bump for a great product.