PDA

View Full Version : FS forged 19" BBS RGR

96cosmosM3
06-10-2009, 07:01 PM
Lightweight forged BBS RGR. These wheels are in excellent condition with no curb rash.

Front 19x9.0 +20 offset, Backspacing: 5.82"

Rear 19x10 +25 offset, Backspacing: 6.49"

These are special order only from tirerack at $1095 and $1155 each.

Im asking $2200 for the set. Located in Los Angeles. Shipping is $100.






http://i98.photobucket.com/albums/l252/jjons50850/P6070001.jpg

http://i98.photobucket.com/albums/l252/jjons50850/P6070002.jpg

http://i98.photobucket.com/albums/l252/jjons50850/P6070003.jpg

http://i98.photobucket.com/albums/l252/jjons50850/P6070004.jpg

http://i98.photobucket.com/albums/l252/jjons50850/P6070005.jpg

http://i98.photobucket.com/albums/l252/jjons50850/P6070006.jpg
TxGR8White
06-10-2009, 08:22 PM
Too bad the offset on the fronts are too large, plus you might need hubcentric rings. Do you know the hub diameter on these?
GimmieSumMo72
06-10-2009, 10:08 PM
if they are coming off his M3 and purchased them from tire rack, they should have come with the BBS PFS system. which includes the 72.5mm rings and retaining clips...

if not, then w/o out the rings all BBS rims have an 82mm bore.

ask me how I know...
96cosmosM3
06-11-2009, 12:56 AM
GimmieSumMo72 is correct, they use PFS - 72.56mm included.

Do you have any pictures of your car and what are the specs of your RGRs?
Bryson
06-11-2009, 03:01 AM
don't think those offsets are low enough in front for use without spacers, but with some 15mm's up front you'd be good to go :)

sexy wheels
GimmieSumMo72
06-11-2009, 07:29 AM
GimmieSumMo72 is correct, they use PFS - 72.56mm included.

Do you have any pictures of your car and what are the specs of your RGRs?

mine are the 18x8.5's all around... i got a really good deal on them, or else i would have gone staggared.
TxGR8White
06-11-2009, 10:25 AM
don't think those offsets are low enough in front for use without spacers, but with some 15mm's up front you'd be good to go :)

sexy wheels


Always like seeing people buy super expensive wheels, only to have to use spacers to make them work....

:) :) :)
Mark850
06-11-2009, 04:21 PM
Always like seeing people buy super expensive wheels, only to have to use spacers to make them work....

:) :) :)Not me.....:shifty
96cosmosM3
06-11-2009, 04:56 PM
Always like seeing people buy super expensive wheels, only to have to use spacers to make them work....

:) :) :)

Thanks!
GimmieSumMo72
06-11-2009, 05:09 PM
Not me.....:shifty

yeah me neither...

if the OP got them from tire rack the spacers and bolts should have come with the set as well!