Hey gang, I just got off the phone with Victor and MMS Tuning and if we can get 10 people together we can get the carbon fiber lip below for 199.00 delivered.

Click here to see a picture (http://www.mmstuning.com/shop/store/catalog/E36_frontsplittercarbonfiber_bg.jpg)

Would anyone be interested in this? Here is the actual add from their site.

NEW! front bumper extension Lowered approx.2.0' Enables your Bimmer to slide through from oncoming air pressure. and dragging the front part dramatically! available in two different sizes of 2.0' ow and 3.0'!

( Only for 95 & up OEM front bumper M3)

that thing is pretty slick! so i take it that the carbon fibre lip is just the same as the infinity 1 lip only wrapped in carbon fibre? or are they different designs?

how about Rieger DTM splitter?

Originally posted by 1995red318i
that thing is pretty slick! so i take it that the carbon fibre lip is just the same as the infinity 1 lip only wrapped in carbon fibre? or are they different designs?

no I think it's the cupspoiler wrapped in CF...not a bad deal though, I would jump on it if I didn't get the ACS CF lip...

I currently have an ACSchnitzer carbon fiber lip and I'm looking for something else :) I've scratched it up a little and it's enough of a reason for me to start looking.

Incidentally what did you pay for the ACS Lip?

Click here to see my ACS Lip... (http://us.f1.yahoofs.com/users/45922e0/bc/Matt%27s+BMW+M3/95+Daytona+Violett+M3-2.jpg?bcCn.N_AL65Dsyks)

I am in as long as I can see a picture of this on a m3

Check reiger's site.

chewtoy,

I remember Victor saying he had a pics of the actual lip on a car.

Can you see if he can posts some of those pics?

I want one but would like to see actual pics before deciding.

From the looks of it , it looks like an Infinity lip with a splitter underneath.

That is a great price, I would be interested

Ok guys.. I think I'm going to pass on the GB but I encourage all of you to push on. I had to re-think what my priorities are and I currently have a CF ACS lip so I'm going to put the money towards a 3.38 diff instead. I need an edge for autoxing and ground effects isn't going to be the edge I need :)

To all those interested, Victor will send you a pdf if you request it from him (victor@mmstuning.com). Just drop him a email and tell him "chewtoy" told me to ask you for some pictures of the m3 cf lip. I don't think they're any different than the one's I've seen on reiger's site so you might want to check there as well. It's tough finding pictures of this thing, God knows I've tried. Good luck!! And sorry for bailing on my own GB!

IT looks pretty sick, but again, I'd like to see it installed on an M3. Also, just to clarify, it is that whole piece, not just the little splitter, right? Chewtoy, I know that you are backing out of the GB, but it would be great if you could post pics. thanks

-Jon

It seems like its the whole piece

bump, this is a good deal

anyone have pics of this on an actual car??

How is this going? We have enough orders to get it through?

How is this compared to BBR-Tuning's?

I am DEFINITELY in if we can get hit it ... so add my name to this list. Someone put the damn list together :D

I really need a new lip, it's pretty beat up. I'm interested in this deal. Someone willing to put this together ??

To anyone that is interested in this lip, call Victor at MMS Tuning and tell him that you would like to purchase the lip under "ChewToy's Group Purchase for 199.00". See what happens. Good luck.

Originally posted by Willy///M3
chewtoy,

I remember Victor saying he had a pics of the actual lip on a car.

Can you see if he can posts some of those pics?

I want one but would like to see actual pics before deciding.

From the looks of it , it looks like an Infinity lip with a splitter underneath.


pictures are coming up today. I m sponsoring DADO`s E36 from DTMpower.net his car is in miami right now if hes finished
the pictures will be shown. if not I can shoot some on an another e36.

chewtoy -- I already emailed Victor. Vic said he has one more left in stock ... I was waiting for the rest of the yokel's to call in. Like I said, I am in 100% if we can get this price of $199. I am in 99% if we cannot, hehe ... so, I guess I am in??


Geez Vic... you are sponsoring a car which really does not need sponsoring ... not like Dado can't afford the parts ... :D

I will take some pics after i pickup the car today.

yes please post pics. which version did you get?

Interested too after seeing some pics.
Would like to know if it is the lip and splitter.
Anyone know what a stanrd Infinity lip will lower your front.
This one says 2 inches

My understanding is that you will need the m3 lip to attach this on one. MMS Tuning also has the factory m3 lip if you need it. Hope that helps.

what car did he get? (DADO) i thought it got stolen?

add me to the list if we can get 199. Also, willy, can you tell me where you got your CF hood? thanks.

-Jon

You don't have to be added to any list. You should be able to just call MMS and talk to Victor and ask him for the special price on ChewToy's Group buy of 199.00 and he should be able to hook you up. Good luck.

hmm...chewtoy ... he quoted me a price of $250.00 shipped :dunno?

Did you mention the ChewToy GP? Did he say he would refund the difference if there were 10 orders? I haven't talked to him since I decided not to get one so I'm not sure what changed.

Originally posted by twelve-o-three
what car did he get? (DADO) i thought it got stolen?

an M3 95 active is doing the engine work hp will be around 500
color is ferrari yellow.

Originally posted by m3j0n
add me to the list if we can get 199. Also, willy, can you tell me where you got your CF hood? thanks.

-Jon



its made custom from a real cf . has the same vents like the
ptg gtr m3. company is Mashaw in CA.

I am vey interested but I need to see better pictures...

:)

im interested.. need better pix first

Originally posted by ChewToy
My understanding is that you will need the m3 lip to attach this on one. MMS Tuning also has the factory m3 lip if you need it. Hope that helps.


Yes we supply the oem lip if you`d need to use w/cf lip.:)

I just spoke to Victor, he said price of $199 shipped is still good if we can get 10+ people in. He wants at least 10 initial orders to ship at this price. From what I see there are about 4 people so far.

Anyone have close up pics of this lip?

Victor,
it isnt the same lip as the one shown on the yellow m3 above, is it?.. it looks different. Either way, could we get pictures of it installed on an e36?

thanks,
jon

Here is picture my of lip installed

sorry guys -- this is taking WAY TO LONG ... I'm just going to pay the extra money and get it from another place ...

looks sweet! Anyways, with less than 10 it's $250 shiiped. Don't think we can get 10 people together, so if anyone needs it right away should go ahead and buy it, I guess $250 shipped is still a good price ??

Guys.. I have posted some pics of Shadowman's M3 with CF Lip. Thank Deepak!

Click for link to see some pics (http://f1.pg.photos.yahoo.com/chewtoym3u )

Why don't we get a head count of how many people are interested. Send me an email and I'll calculate how many people are in so far. Please don't send an email unless you are sure you want one for 199.00! Tia.

OK... thanks for the clarification.. that is most definitely not the same as the lip in the firstpicture of this thread. I am not goingto be included in this GP. Thanks though.

-Jon

i guess this is over!

i guess this is over!
Everyone on this thread were confused and there where two diff types of lips talked about. The first one in the picture is deff not the rieger cf lip spoiler which everyone was posting pictures of!!!! Then MMS could not supply a picture of the first spoiler pictured in this thread installed on a car.