I recently changed the front lower wishbone/balljoint and as I was doing it I needed to disconnect the ABS sensor harness and the wire for the brake pads. I turned the ignition key to move the steering wheel when the connectors were apart and that trigered the trouble code so, now I get this "check brake linings" all the time and my oil lights don't work. I just changed to synthetic and I want to reset the codes. I tried shorting the pin 7 and 19 and tried grounding the 7pin per instructions in this forum but was unable to achieve any result with both methods.

How do I do this???? Are '95s different than '97??