show hands who want something like this...
street price is $159usd + $12 shipping...

if I can get somewhere under $100 who wants one?

i'd get it, but i need details about quality and installation procedure.

is this the front 3 piece under panel? if you can get in under 100 i'm in

Is this the underpanel that replaces the stock plastic one?

yes, covers from left to right
I haven't checked the quality, that's why I put feeler ;) but it
should be great...

I'd be interested depending on quality and fitment also. I wonder how hard the install is going to be since my stock mounting points are torn.

It's supposed to be a really good quality piece. If you can get it for under a $100, count me in.

if u can get under a 100 ill be in

100 and i am in

I am 2 for $100

I would be in if the thing could be shipped out by next week. Where can I purchase this piece?

Discount code "Bimmer03" for free shipping for online orders...just thought I'll share...from the lastest issue of Bimmer magazine.

Originally posted by Slowpoke
Discount code "Bimmer03" for free shipping for online orders...just thought I'll share...from the lastest issue of Bimmer magazine.

wtf you are talking about?:confused:

lol that allows you to get free shipping from any online orders..it'll save you 12 bucks. I don't know it's late... But ya under $100 and I'm in. lol sorry it's late

Same or better quality and design as JTD, and under $100, then I am in.

-Tom

me2

Count me in!!

what are the advantages of this?

Originally posted by KaOTiKM3
what are the advantages of this?

None really, until your stock unit gets ripped off or just falls off over time. Once that happens, it makes sense to replace it with something that will last longer and be more durable (such as this or the JTD panel).

I suppose some replace them as preventive maintenance just.

How much does the stock cost, if anyone can recall? I replaced it last year but lost it after few months. I'm driving without it now but think it's OK.
Also, I think I lost one side's mouting point. Is it a problem with JTD style if I missed one side's mounting point?

I am in if it's 100.

nm I'm out...it was late last night and I thought this was for a JT design product...reading this post, I see that it's only a replica. Sorry about that.

if u can get the JTD design under panel im in. PM if this goes through bc im modding my car this month and depending on how much i spend and how much i have left over.

Count me in.

will check out the shop tmmr afternoon...

Folks, I'm a dealer for JT-Designs. I don't mean to steal the group purchase, but it looks like a lot of people would be interested in only the JT-Designs unit. :dunno

That said, I MIGHT be able to do around the $139 + $10 or so shipping area if we can get 10 participants. Would you guys be interested in that? If not, I'll go on my merry way. If yes, I'll see if we can do it. Just let me know.

Also, v.b., since the people know and trust you, I'd be more than happy to let you run the GB and maybe give you a special deal for doing so. ;)

I'm in for the JTD underpanel. Micah, you da man.

Micah,

If you can do the JT designs underpanel for $149 shipped, I'm in. Please contact me at bmwmpower@sbcglobal.net

Thanks,

Barry

I'm in either way!!:D

Micah is a great guy and I have done a ton of busy with him (with no complaints just compliments!!!:buttrock ).

Either way guys let's make a decision and get this thing going :redspot

Hmmm, looks like there's a lot of interest for the JT-D. Let's give it another day or so to see where people stand and what v.b. comes up with, and then we'll make some decisions. :)

If the quality of the knockoff is nice I'm interested in it... if not I'm also interested on the real JTD...:)

Woohoo you da man, I'm in for a JTD panel.

i'm in for the jtd if the knockoff doesnt come thru .. rmaz@hotmail.com

:mad: holy shit...it's just a feeler thread..and competition has already jumped in??

I talked to the guy for few minutes today...seem like it's not 1 or
2 weeks can ship to everyone's door steps...he assumed we
have 20 ppl..he will call back tmmr





:rolleyes: knock off? if quality is better than JTD one...
and the price is $69 off retail...I don't think we should call that.

V.b., like I said, I'm NOT trying to steal your group purchase. That's precisely why I haven't posted a new thread for JT-D underpanels. :) I wanted to wait and see how yours panned out before doing anything that might hurt your potential group buy.

PLEASE, PLEASE, PLEASE understand that, yes, while I wouldn't mind making a bit of money, this is more in an effort to satisfy a demand than anything else. If you can do it and it's what the people want, I've got no interest in interfering. :D

'Knock off' is anything other than the genuine article.

That being said, Micah, if you can do that price, I'm in. Not interested in the knock-off.

what do you gain by doing this mod exactly? keeping it clean underneath the car?

Let's wait for v.b. to get final details, pricing, ship dates, and possibly pictures for his group purchase tomorrow. Then we can see what will be appropriate. Again, I don't want to rain on anyone's parade.

I would be interested in either. I know what the JTD looks like and the quality. I do NOT know what the "v.b." looks like or its quality, so I am undecided.

Let's see some pics of the v.b. one so I can decide. Either way, i need one. Tim

How soon can you post pics of the non-JTD panel?

I'm in if it's under $100 and depending on quality. Is the JTD one all 1 piece?

I might be interested in the JTD group buy if this falls through since I was planning on getting a JTD soon anyway.

JT-D is made of three pieces that all bolt together to form a solid underpanel. VERY well made. I've got one I need to put on my car as soon as I replace the cooling system. (Why oh why did you have to spring a coolant leak? I was just about to treat you to a new set of tires! :bawl)

v.b. -- PICS and INFO man....Now that Ihave decided that I need an underpanel, I want one NOW! LOL.

Pass on some pics and info of the knock-off one, how it mounts, etc. I want something that is solid, but not a heavy ass piece of diamond plate either....TIA, Tim

vb - i have a friend who wanted to get a JTD underpanel, i have asked him to hold off do u have any info on the JTD *knock-off* underpanel, need pics and details incl price with s&h.

:dunno

My thoughts exactly. Looks like v.b. has cut bait.

LOL. Maybe...we shall see. I PM'ed him...maybe he is "away" right now.

:mad: just got off the phone with the guy in that company...

it is a fabricate product, which mean they manufacture like 50 sets
when I want them, no single order...as I know...the piece will be
laser cut, so I guess it is not cheap quality...but will not be
anodized (probably silver in colour)


I haven't received the exact price quote..since they have trouble
with the screws ordering from the other company...

but hey....price is cheaper than I thought....:devillook
it maybe down to 85-90usd per pc....:D but well, everything is
NOT confirmed ...so be patient

I'm in too... put me on the list for whatever... I've procrastinated too long on having no underbody!!!

Thanks,
Steve

it is a fabricate product, which mean they manufacture like 50 sets
when I want them, no single order...as I know...the piece will be
laser cut, so I guess it is not cheap quality...but will not be
anodized (probably silver in colour)


So does that mean that we won't be able to see the product before we commit?

I need a new underpanel regardless. I'll keep checking back.

Originally posted by C///M3
So does that mean that we won't be able to see the product before we commit?


well, now I just assume I am able to sell 50 sets and no
competition jump in:rolleyes: ....I wouldn't mind bring them all home first
and then distribute to whoever need it. :D

the shop is only 15minutes away from my house...

OK, well keep us posted on the progress. I will need an underpanel by winter/rain time. Tim

I'd probably be interested in eithe offer. Would like to see pics or hear more on the vb fabrication.

I'll be in too if I can see some pics. TIA.

i reallllly need a new underpanel i dont think i can wait for the vb deal... can we just start the jtd deal?

im interested in a under panel .... mine just fell off today!

are we gonna do this or what?

100$ or less and im in too

100$ or less and im in too

same

So wassup? :dunno

it takes time to fab those panels..
will be avaliable at my door beginning of september. :az:

september.... ok can we start the jtd group buy now and then in september u can have ur group buy? i need an underpanel just need u to tell Whippedbutter to take over the Group Buy

i need one NOWWWWW!!! my car's falling apart!

Your wish is my command:

http://www.bimmerforums.com/forum/showthread.php?s=&threadid=121851

:)

I might be interested, but I'd like to see one first. Does it work on a non-M bumper?

JTD underpanel works with both M3 bumper and non-M3 bumper.