HELLO GUYS A BODY SHOP TAKE THE HEADLIGHTS ASSEMBLY FROM MY CAR LENS ,HOUSING EVERYTHING I ALREADY INSTALL BACK THE POP UP ASSEMBLY ,BUT WHEN I TRY TO FIGURE OUT THE LENS INSTALL I NOTICE THERE IS SOME ADJUSTING SCREWS MISSING PLUS THE BEZEL AND THE CLIPS ,IF POSSIBLE SOMEBODY KNOWS HOW TO PUT IT BACK AND IF THERE IS A GRAPHICS? OF HOW TO DO IT ? SOMEONE TOLD LONG TIME AGO ABOUT A NEW KIT AVAILABLE UPGRADE VERSION? ANY HELP NEED IT!

Thanks

Luigi

Adjusters are no longer available for US spec. cars. Euro and J specs Im not sure of but here's a link to give you an idea what you can do. http://wuffer.net/MyFiles/Headlights.pdf

Thanks for your help. do you know where i can look for a how to ? remenber i didnt take it out of the car .

Thanks
Luigi

Thanks for your Help i already fixed with your details at Wuffer! i machine the copper parts and Whola! is done .thanks for your help and info!

Adjusters are no longer available for US spec. cars. Euro and J specs Im not sure of but here's a link to give you an idea what you can do. http://wuffer.net/MyFiles/Headlights.pdf
Thanks for your help !i machine the coppers seats from brass and Whola! is done also i put some 5200 marine sealant on it just in case!

Thanks

Luigi