I have rebuild the M70 engine and i need to do full throttle adaptation without connecting computer.
Please tell me how to do it becouse i have problems with EMLs.

Tough 1 there i know other folks have done it but on here

I have rebuild the M70 engine and i need to do full throttle adaptation without connecting computer.
Please tell me how to do it becouse i have problems with EMLs.

Heres a link i found for ya
at the bottom of the page .
Theres also Haltech engine management.

http://www.lambolounge.com/Chassis/Engine/BMW-V12/BMW.asp

Bump

klick--->http://www.cafeamwehrgang.de/fbilder/klick.jpg (http://www.v12diablo.co.uk/main.htm)<--- klick

From where do these Lambo-guys get the intake manifolds???

Wokke could probly sell these guys some chips, bet they would jump at the chance

Not clear what you're asking, but what BMW calls adaptation requires the engine to be running for a while with all the computers engaged. The process calibrates the DK motors, purge valves, and O2 sensors to the DMEs and EML.. If you need to get an initial value for the DK motors, you can try to adjust the wipers so that both DKs have similar resistance when closed or fully open.

The DME pins for throttle position from the EML are 62 for idle and 12 for WOT. Grounding those pins selects the corresponding throttle map.

Sounds like he wants to dismiss all management and go the other route, I think?

http://www.v12diablo.co.uk/misc.htm
D/L this video
the 30meg one first link cable operation TB

http://www.v12diablo.co.uk/Videos/ParallelV12.MPG
save target as

My engine
http://bmtcordah.pl/8silnik/r6.jpg
http://bmtcordah.pl/8silnik/r8.jpg
If anyone is interested in looking more

http://autobmwklub.triger.com.pl/forum/viewtopic.php?t=95130&sid=925f253eb5a296603b8cc0b4e7cdaf89

And thanks to wokke i got the materials on DK sync

http://bmtcordah.pl/8silnik/throttle.pdf
http://bmtcordah.pl/8silnik/dksynk.pdf