On the side of our cars there are the lift points that pop out ,Well one of mine had poped out and so i pushed it back in a lil too much. Now i afraid of messing with it to try to pop it out is there a certin way to do this with out chiping the paint?
Im missing some tools from the trunk kit so any info would help thx

:help

push firmly on the lower half of the disc, the top should pop right out. Do not use a screwdriver!

That one was Tricky! If you reach under the car following the course of the plastic pop out, There's a cut out about 3 inches, Stick a slim screw driver in there and push out "easily", MWrench even made a jack adapter for the bottow cut out, Just feel under the plastic pop out, You will feel it.

guitar pick will also work in a pinch if it's stuck too deep, I keep these around as they're extremely useful when disassembling electronics hardware

ill try thx guys