Id like to get this going. I dynoed my car back in March of 2007 if I remember correctly and have added a few more mods and would like to see what I am making for power. Jim, can you set this up? We need to get a group rate, last time it was like 60 or 65 for like 3 or 4 pulls. This was at dez in Seekonk.

yes

Yes please.

Id like to get this going. I dynoed my car back in March of 2007 if I remember correctly and have added a few more mods and would like to see what I am making for power. Jim, can you set this up? We need to get a group rate, last time it was like 60 or 65 for like 3 or 4 pulls. This was at dez in Seekonk.

what were your #'s and with what mods

what were your #'s and with what mods

228WHP:redspot/208WTQ:embarrasm

Totally stock exhaust, dinan cai, dinan throttle body, dinan stage 3 chip with fuel pressure regulator, dinan hfm(aka euro 3.5hfm). I think that was it.

Now I have ltw flywheel, obdII midpipe, eisenmann race catback, and a 3.38 diff, some people said that actually gains whp, who really knows.

I would definitely be interested. Is there a fan running in front of the car? Because I have a "fan delete" right now and I don't want to pop an HG or something like that. :D

I would definitely be interested. Is there a fan running in front of the car? Because I have a "fan delete" right now and I don't want to pop an HG or something like that. :D

Yes there is Fred:)

Hey guys i would definitely be interested too but i have a 325xi so im just wondering if i could dyno mine since it has the AWD?

My car is near stock, but i'd love to get a baseline.

Put me on the list.

id be in too but since it is a sunday i need atleast 8+ to set this up with the dyno

I'd love to get mine again with the different exhaust and the rebuilt vanos but I leave for Vegas that morning.

Id like to get this going. I dynoed my car back in March of 2007 if I remember correctly and have added a few more mods and would like to see what I am making for power. Jim, can you set this up? We need to get a group rate, last time it was like 60 or 65 for like 3 or 4 pulls. This was at dez in Seekonk.


Shit, I better order my ebay headers and mod my OBD1 mid-pipe. I was going to do the mid-pipe mod tomorrow actually. Also, I want to change my plugs again too. The car just doesn't feel right with the copper plugs for some reason, even though everyone sweats them.

I hope I don't chicken out installing the headers. :help

Whatcha doin to the OBD-I midpipe?

Is there a hesitation during acceleration or something like that?

add the 332ti to the list!

OK so if we need 8 people, here's a list of interested parties:

1. Savage217
2. EsMcBlurM3
3. konarider98
4. FredK
5. bigbeansm3
6. ninety5M3
7. (maybe) vertius
8. hamlerda

Whatcha doin to the OBD-I midpipe?

Is there a hesitation during acceleration or something like that?

Taking it to Lou's Exhaust in Westport. For $100, they will make the mid-pipe a dual system.

I was having a hard time finding an OBD2 mid-pipe, so I figured for a $100, I'll give it a shot.

It just seems slower to accelerate and the throttle doesn't feel "crisp". Could be a bunch of other things, but I really noticed it immediately after changing the plugs.

Hm, can't go wrong for $100! As for the hesitation issue, I guess it could be a whole bunch of things, but ya might as well start with the last component you changed.

I'll call Monday and set it up

I'll call Monday and set it up


Cool. One of my good friends will probably want to get in on this. Any issue with bringing a Trans Am?

Cool. One of my good friends will probably want to get in on this. Any issue with bringing a Trans Am?
doesnt matter bring anthing you want

doesnt matter bring anthing you want

I wish I could take my Rabbit GTI and see what it pulls. Stupid clutch, again.:(

I know they wont take more than 15 cars on a sunday

OK so if we need 8 people, here's a list of interested parties:

1. Savage217
2. EsMcBlurM3
3. konarider98
4. FredK
5. bigbeansm3
6. ninety5M3
7. (maybe) vertius
8. hamlerda


im in Ferdk! you for PRESZ!

I'll call Monday and set it up

Werd let us know

Taking it to Lou's Exhaust in Westport. For $100, they will make the mid-pipe a dual system.


I got this done on Saturday. Sounds better now too. As for the power, it feels better, but I have no idea.

I should be able to make it to the dyno.

We are in for Sunday the 19th @ 9am :redspot

ok, so it's gonna be at:

Dez Racing
1761 Fall River Ave
Seekonk, MA 02771

yea, i'm in - why not. hope i dont have to pull out due to work

ok, so it's gonna be at:

Dez Racing
1761 Fall River Ave
Seekonk, MA 02771


Time?

im in but i have an XI. does this dyno do AWD?

Time?
9am

im in but i have an XI. does this dyno do AWD?
:dunno


BTW he said no more than 10 cars

Sweet! Lets do this.

Sweet! Lets do this.
:confused we are

:confused we are


I totaled my car last night, so obviously i wont be taking part.

No injuries, but major frame damage to the e46 :(

Sorry to hear that bigbeansm3.

ok, so

1. Savage217
2. EsMcBlurM3
3. konarider98
4. FredK
5. ninety5M3
6. vertius
7. hamlerda

JNFIV, call Dez and see if they do 4wd. My guess is no, just on how a Dynojet is set up.

I just called dez. They only have a rwd dyno

1. Savage217
2. EsMcBlurM3
3. konarider98
4. FredK
5. ninety5M3
6. vertius
7. hamlerda
8) My dad may go so he is a maybe

Oh shit, I gotta ask Jason! Oh how I wanna see that Ruf on a dyno...

1. Savage217
2. EsMcBlurM3
3. konarider98
4. FredK
5. ninety5M3
6. vertius
7. hamlerda
8) My dad may go so he is a maybe
9) Jared

no go... i need 4 wheel dyno

no go... i need 4 wheel dyno

:confused

I believe it's because there's something funky with the wheel speed sensors. I guess the engine goes into a limp home mode if it detects only the rear wheels are turning, but the fronts aren't.

I believe it's because there's something funky with the wheel speed sensors. I guess the engine goes into a limp home mode if it detects only the rear wheels are turning, but the fronts aren't.

It starts cutting spark for a soft limit around 6k or a little lower, if i remember right from my last dyno. Nothing we did was able to get around it except to just run the Mustang dyno in 4 wheel mode to spin the front wheels.


Esssss-fiddy-fo' ya heard? ;)

^ Interesting....No brake stands 4 U.

It starts cutting spark for a soft limit around 6k or a little lower, if i remember right from my last dyno. Nothing we did was able to get around it except to just run the Mustang dyno in 4 wheel mode to spin the front wheels.


Esssss-fiddy-fo' ya heard? ;)

What did it make for power?

What did it make for power?

286rwhp on a Mustang dyno rolling 4 wheels, w/ a busted/dead MAF.

It starts cutting spark for a soft limit around 6k or a little lower, if i remember right from my last dyno. Nothing we did was able to get around it except to just run the Mustang dyno in 4 wheel mode to spin the front wheels.


Esssss-fiddy-fo' ya heard? ;)

augy and i will just lift the front tires off of the ground while you do your pulls...

I say unplug ABS sensors and speedo at the diff????????

1. Savage217
2. EsMcBlurM3
3. konarider98
4. FredK
5. ninety5M3
6. vertius
7. hamlerda
8) My dad may go so he is a maybe
9) Jared
10) adstock

We are in for Sunday the 19th @ 9am :redspot

Did you find out how much it's going to cost?

Its like 60 bucks

Alright, cool

I say unplug ABS sensors and speedo at the diff????????

Huh.... interesting idea to just unplug front and rear speed sensors.

^ You have to trick the sob

bump

We still on for this Jim?

hellooo? anybody?

I'd be fine with having it this weekend or next weekend!

I talked to Nick last night Fred and he said that we're still on.

We plan to meet on the 495 past the Pike.

Dan, Adam, My father, and I are leaving around 8 30 am. We will get there around 9 30ish.

fuck! forgot about this. god damnit

stuck at work in the cold

how did this turn out? care to post your results?!

I got 219.8hp, 218 torque
nick got 225hp, ~208torque
nicks dad got 90hp

I'm sure Nick(savage) will post some pics soon

I got 219.8hp, 218 torque
nick got 225hp, ~208torque
nicks dad got 90hp

I'm sure Nick(savage) will post some pics soon

that's pretty sweet, that means something like what then? ~ 255-265 hp and torque at the crank?

that's pretty sweet, that means something like what then? ~ 255-265 hp and torque at the crank?

me ~253hp
nick ~259hp

but I have more torque :stickoutt

how many cars went?

how many cars went?

6.

Yea Ill post the vids up tommorrow prolly. I dont think I lost power, each run went up each time. All I know is the mods I did didnt do shit for power. I thought they helped with throttle response though, something the dyno wont tell you.

wish i coulda gone, you guys were 2 minutes down the road from my house

wish i coulda gone, you guys were 2 minutes down the road from my house

Damn didnt realize you were that close.

6.

Yea Ill post the vids up tommorrow prolly. I dont think I lost power, each run went up each time. All I know is the mods I did didnt do shit for power. I thought they helped with throttle response though, something the dyno wont tell you.

Yeah, that was weird yesterday. I actually lost some torque with my mid-pipe mod. :(

Same HP as last year, but my torque went down 5.

Yesterday, 232whp, 217tq. Last year, 232whp, 221tq.

I'll post both dyno sheets, once the new one is scanned this morning.

Yeah, that was weird yesterday. I actually lost some torque with my mid-pipe mod. :(

Same HP as last year, but my torque went down 5.

Yesterday, 232whp, 217tq. Last year, 232whp, 221tq.

I'll post both dyno sheets, once the new one is scanned this morning.

Yea its weird. Im disregarding my 3hp loss. Its probabaly the same as last time but that kind of sucks that you spend that money on mods that do nothing (midpipe and catback in my case). Paul you can always throw on a stock obdI midpipe again.

Paul you can always throw on a stock obdI midpipe again.

Better yet, I'll stuff one of the pipes with a tennis ball. :D

Last Year Dyno with mods listed below (minus mid-pipe mod)
http://im1.shutterfly.com/media/47b7d705b3127ccec264c84b82ab00000010O08QYtmTZm4bA9 vPhY/cC/f%3D0/ps%3D50/r%3D0/rx%3D720/ry%3D480/

Current Dyno with mid-pipe mod:
http://im1.shutterfly.com/media/47b8ce01b3127ccec53cd4e9998300000040O08QYtmTZm4bA9 vPhY/cC/f%3D0/ps%3D50/r%3D0/rx%3D720/ry%3D480/

agh sorry guys, I came down with a cold this weekend, and didn't want to move too much yesterday. :(

I was down 20whp from last year wtf :mad:(

I was down 20whp from last year wtf :mad:(

Rofl yesterday was a fucked up day in many ways.

Rofl yesterday was a fucked up day in many ways.
:devillook:shifty

:confused

:wave:confused

:wave

Rofl yesterday was a fucked up day in many ways.

+1 Tranny is comming out tonight :mad

:( I still dont understand how i lost 20whp stock s52s put down more power wtf :mad

+1 Tranny is comming out tonight :mad
you going to colt state next week i got a bunch of your stuff you left behind

I'll try, if not just give it to Nick.

Thanks

I'll try, if not just give it to Nick.

Thanks

If I go.