Hi Wuffer! I hope all is well. I sent you a PM, Email, as well as a post (http://forums.bimmerforums.com/forum/showpost.php?p=13527633&postcount=13); all on different topics.

When you have a chance, please forward me your thoughts! Thanks for everything you offer to the community, and sorry for the pestering. :embarrasm

Regards
Omar

I responded last night by email sir...

I responded last night by email sir...My filters are acting up. My humble apologies! It shouldn't happen since I marked you as a "safe" odd. It doesn't matter, now your a contact so it should definitely not filter it inappropriately.

Also, I replied! :)

I can't seem to find the PM I sent. Might have never properly sent in the first place.

I think this was the list of parts I was looking to get a hold of as well:



Instrument cluster-US spec
Shifter boot - Steptronic (condition unimportant)
Parking brake boot - (condition unimportant)
Hood release lever (the one that you pull in the driver's side foot well)
Inside door handle portion (on the actual pull handle on the inside door trim, the part that faces toward the door. it looks like a little half cylinder. (condition unimportant, I just need its dimensions intact so I can remake it out)

Wuffer.... have you received my emails/PMS?

-JRW

Aura,

Don't want to hijack the thread, but do you still have those mufflers? I pm'd you a while back...

Toy

Aura,

Don't want to hijack the thread, but do you still have those mufflers? I pm'd you a while back...

Toy

Sorry about that Tony, I was overseas for a while and had to halt everything as I simply wasn't able to physically touch let alone ship the set for awhile.

I am waiting on an individual to expressed interest prior you to either confirm or pass. I will email him again. I will let you know. If you are still interested tell me and I will PM you my contact info including cell so I am never out of reach.

I can't seem to find the PM I sent. Might have never properly sent in the first place.

I think this was the list of parts I was looking to get a hold of as well:



Instrument cluster-US spec
Shifter boot - Steptronic (condition unimportant)
Parking brake boot - (condition unimportant)
Hood release lever (the one that you pull in the driver's side foot well)
Inside door handle portion (on the actual pull handle on the inside door trim, the part that faces toward the door. it looks like a little half cylinder. (condition unimportant, I just need its dimensions intact so I can remake it out)


Here is an image of this piece, highlighted on the right in red:

Still very much interested. Let me know how it goes, Thanks:)