So I bought a unused TC Kline/HMS 4-pt bolt in cage, less the hardware. I was researching 6x6" steel sheets (1/8" thick) and it ended up being $90. I'm not looking to spend $90 for steel sheets that I'm just going to cut up and make as my hardware for this rollbar. Anybody know where I can find an 1/8" sheet of steel that I can cut into 4 6x6" squares?

Thanks,
Mike

Local welder will probably sell you some.

Millers Welding Services Inc - millerswelding.com - (610) 696-2864

Baillie Fabricating & Welding - maps.google.com - (610) 701-5808

i've bought quite a bit of metal from Onlinemetals dot com

they have good prices. They are in Washington State, but even with shipping i've gotten some things cheaper then they cost locally.
aluminum
chromoly tubing
steel
stainless
perforated sheets
etc.

What hardwear? You mean like for gussetts?

I guess you haven't priced steel lately... Shipping will kill you now...
[/URL]

[URL="http://www.merchantcircle.com/business/Durrett.Sheppard.Steel.Co.Inc.410-633-6800"]Durrett Sheppard Steel Co Inc (http://www.merchantcircle.com/signup?utm_medium=unclaimed&utm_source=create)

I would check with McMaster Carr www.mcmaster.com (http://www.mcmaster.com)

Prices are a little high but they have a large selection and everything is almost always delivered the next day.

here ya go

http://www.onlinemetals.com/merchant.cfm?pid=10010&step=4&showunits=inches&id=802&top_cat=849

6" wide by 1/8 thick hot roll steel plate.

just get 2' . make four cuts, and you have 6'x6' plate.
only $8.83.
or it looks like they will cut it in 4 pieces for you for $3.32

UPS ground to virginia (me) is $12.72..
probably about the same to your locale.
so you are looking at $25 total.

Isn't there a metal yard in west chester? I think it was in the same industrial park as the place where you can race the rc cars.

Thanks guys! But Moroso has some 6x6" 1/8" thick steel plates with grade 8 hardware that I just ended up getting. Hopefully they will work..will find out this weekend!

McMaster was going to be like $90 just for the steel :(